Advertisement
TURNING ON DAQRI SMART GLASSES
Connect, Power On, Wait.
1. Connect the USB-C cable to the Smart Glasses and the Compute Pack
Power On by a single press of the power button on top of the Compute Pack
2.
3. Don't move the Smart Glasses. W ait until the LED turns Solid White.
*In order to fully charge the DAQRI Compute Pack, connect the power supply to a wall outlet. You can use DSG while
the DCP is charging if desired.
WEARING DAQRI COMPUTE PACK
DAQRI Compute Pack already has a clip built-in, making it ready to wear right away.
Press the top of the clip to open and attach it to your belt or pocket. Just make sure you
keep the vents unblocked to prevent the Compute Pack from getting too hot.
WEARING DAQRI SMART GLASSES
Tilt and Place, Pull, Drop down.
1.
T ilt and Place the back of DAQRI Smart Glasses against the back of your head.
Advertisement
