Initial Setup; Aux Input Connection; Bluetooth Operation - Crosley CR704D Instruction Manual

English

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Remove the tie-wrap that is holding the tonearm.
3. Plug the power cord to the power outlet.

Aux Input Connection

You can connect an audio device to this unit and play your music through its
speakers. To do this, connect the 3.5mm auxiliary cable between your audio
device and the Aux In Jack of this unit and start playing the music.
Note: The aux in connection has the highest priority of all the functions. When there is an
auxiliary cable plugged in, the aux in connection will automatically override the Bluetooth,
turntable, CD, radio or cassette mode. To resume using the other features of the unit,
unplug the auxiliary cable from the aux in jack.

Bluetooth Operation

1. Slide the Bluetooth Switch to the ON position, you will hear an activation
sound from the unit.
2. Turn on the Bluetooth feature of your audio device, search for "Crosley
CR704" and pair.
3. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit.
4. Play and stream music from your device to the unit.
Note:
•
Bluetooth version - 4.1
•
Bluetooth mode has a lower priority than the aux in connection, but higher priority than
the rest of the other modes. When it is under the Bluetooth mode, the Bluetooth
connection will override turntable, CD, radio or cassette mode. To resume using those
features, turn the Bluetooth Switch back to the OFF position.
6