Summary of Contents for ZKC PDA3501
- Page 1 Shenzhen ZKC Software Technology Co.,Ltd PDA3501 User Manual 1. Product Brief Introduction Web: www.sznewbest.com Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District, Shenzhen...
-
Page 2: Power On/Off
Shenzhen ZKC Software Technology Co.,Ltd 2. Power on/off Please put the battery right before power on the device(the battery is Power on: put opposite while shipping). Long press the power key to start. Power off: Long press the power key and click “power off”. - Page 3 Shenzhen ZKC Software Technology Co.,Ltd 3. Barcode, Qrcode Scanner 3.1 Camera scanner(scan barcode and Qrcode) Open the “ZbarScan” App, then press “scan” key to scan(the scanning distance have to be within 10cm ). Web: www.sznewbest.com Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,...
- Page 4 Shenzhen ZKC Software Technology Co.,Ltd 3.2 Laser Barcode Scanner version(scan barcode only) Open the “barcode scanner” App, then press the “scan” key to scan Web: www.sznewbest.com Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,...
- Page 5 Shenzhen ZKC Software Technology Co.,Ltd When the “barcode scanner” App run on the backend, it can scan any barcode in any input box. For example, open the message input box, and press the “scan” key, the barcode number will show as below: 3.3 Qrcode scanner(scan barcode and Qrcode)
- Page 6 Shenzhen ZKC Software Technology Co.,Ltd Note 1: If the device can not use input box to scan barcode, please confirm that whether the “barcode scanner” App run on the backend, or whether the soft keyboard is “English(United States)”. Setting---Language&input-----English(United States)
- Page 7 Shenzhen ZKC Software Technology Co.,Ltd 4. NFC Test Open the “NFC reader” App and put the NFC card on the back of the device(Reading distance is within 6cm). Web: www.sznewbest.com Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,...
- Page 8 Shenzhen ZKC Software Technology Co.,Ltd 5. GPS Test Pull-down the screen and open “GPS”, then open the “GPS Test”App, test it outdoor. Web: www.sznewbest.com Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District, Shenzhen...
- Page 9 Shenzhen ZKC Software Technology Co.,Ltd 6. 3G Test Insert into the 3G card to the slot and power on the device. Click “Change” and select “data connection”, then click “SIM2” as below: Web: www.sznewbest.com Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,...
- Page 10 Shenzhen ZKC Software Technology Co.,Ltd 7. WIFI and Bluetooth test are same as Android mobile phone Pull-down the screen to open WI-FI and bluetooth. 8. SDK Link Web: www.sznewbest.com Address: 1st Floor, No. 1 Block, Zhongkenuo Industry Park, Beiqi Road, Xixiang Town, Bao'an District,...
- Page 11 7. The device complies with RF specifications when the device used at 0cm form your body 8. Declaration of Conformity Hereby, Shenzhen ZKC Software Technology Co.,Ltd declares that this Android handheld terminal product is in compliance with essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of conformity can be found at www.sznewbest.com...
- Page 12 FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Android handheld terminal (FCC ID:2AGEB-PDA3501) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.301W/kg and when properly worn on the body is 0.483W/kg.
- Page 13 Shenzhen ZKC Software Technology Co.,Ltd contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s body and the handset, including the antenna.