Advertisement
Quick Links
Advertisement
Summary of Contents for BWI PCI Duo/TP
- Page 1 PCI Ethernet 10Base-2/T Duo/TP Board User's Manual (GME290PX-001)
- Page 2 1. Checklist Before you start installing the PCI Duo/TP, verify the package contains the following items: -- PCI Duo/TP Board -- LAN Driver Diskette -- This User's Manual Please notify your sales representative immediately if any of the aforementioned items is missing or damaged.
-
Page 3: Boot Rom Installation
RPL-ROM-ADR : 0040-C7xx-xxxx (Node ID) RPL-ROM-IRQ : x (PCI slot IRQ no.) RPL-ROM-PIO : x000 (PCI slot IO address) ADR is the Ethernet Node Address of PCI Duo/TP IRQ, PIO of PCI slot are configured by your system PCI BIOS... -
Page 4: Technical Specifications
6. Diagnostic & Driver Setup Diagnostic program lets you test PCI Duo/TP Node ID address, half-duplex mode, board configuration, or the cable connection between any two stations. Please refer to the Driver Diskette for more information and driver setup procedures. -
Page 5: Electronic Emission Notices
Electronic Emission Notices Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for class A computing device pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.