Advertisement
PRODUCT DESCRIPTION:
1
Indicate led
2
Power button
3
Vol+ button
4
Vol- button
5
Micro USB charging port
3.5 mm audio input interface 3.5mm
6
2
TECHNICAL DATA:
Output power: 3.5W
Distortion: ≤1%
Frequency response: 120Hz~20KHz
SNR: >65dB
Speaker unit: 4Ω
Power input: USB/DC 5V
Sensitivity: 600mV
Product size: 88 x 88 x 41mm
Recharging Battery:
1. This product has a built-in rechargeable lithium battery. Please connect the USB charging
cable to a workable USB port (a PC/Mac or a USB power adapter).
2. When the battery is low, the red power indicator will turn on.
3. When the speaker is being recharged, the red power indicator truns on. When the
recharging is completed, the indicator will turn off.
4. When the battery is completely discharged, the product cannot be turned on before being
recharged for a while.
The Speaker Paired with a Bluetooth Device (First Connection):
1. Make sure that the product has sucient power or has been connected to power.
2. Short Press the power button.
3. The blue power indicator turns on and the Bluetooth pairing blue indicator ashes.
4. Start the Bluetooth device (for example, a mobile phone) to searching mode (just as you
would when searching for a new Bluetooth device on the phone)
5. "Groovi Ripple" is displayed in the list of Bluetooth devices.
6. Select "Groovi Ripple". Enter "0000" if prompted to enter a pairing code.
7. The blue LED stops blinking and stays blue. This indicates a successful pairing.
8. Check the Bluetooth device to make sure that the connection is successful.
9. Press the power button to turn off the product. The product will shut down automatically
after 30 minutes if no audio input is received.
1
4
5
6
3
Advertisement
