Champion 40923 Instruction Manual page 4

Wireless remote release system for wheelybird & workhorse traps
Table of Contents

Advertisement

Available languages

Available languages

Safety
Do not stand in front of the trap when it is in the cocked position. Accidental release of the target
and/or throwing arm can cause serious injury or death!
Before installing the Wireless Receiver on the trap, make sure that the throwing arm is in the
uncocked position, the trap is in the off position and the trap is disconnected from the battery.
WARNING: DO NOT MANUALLY FORCE THE THROWING ARM THROUGH THE
UNCOCKED POSITION AS THE MAIN SPRING WILL TAKE OVER AND FIRE THE TRAP,
POTENTIALLY CAUSING SERIOUS INJURY OR DEATH.
All personnel operating the trap should be thoroughly familiar with the operating instructions
and the safety issues relating to the trap.
Do not leave trap in the cocked position. Accidental release of the throwing arm can occur.
Keep hands and body away from the trap and throwing arm path while the trap is operating.
Always turn trap off and disconnect power when unattended, not in use or performing
maintenance.
Always check that others are safe before releasing the trap.
Stay outside of safety ring zone at all times.
Never store the remote in pockets with the battery installed. Unintentional pressing of the button
will cause the trap to release.
Before working on the trap, ensure the battery is removed from the remote.
WARNING: THOROUGHLY READ
INSTRUCTIONS BEFORE INSTALLING
OR OPERATING THE WIRELESS
REMOTE! FAILURE TO FOLLOW
SAFETY RULES CAN RESULT IN
SERIOUS INJURY OR DEATH !
Contents
• Wireless Receiver (attach included antenna to top
of Receiver)
• Wireless Remote Transmitter
• Adhesive "Hook & Loop" Mounting Pad
(included, not shown)
• 12 Volt Type A23 Battery for Transmitter
(included, not shown)
4
Wireless
Receiver
Wireless
Remote
Transmitter

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents