Advertisement
How to Select Alarm Sound?
1. There are 3 different alarm sounds, SIREN, TELPHONE RING & AMBULANCE, for your selection
2. Make sure the unit is NOT in its ARMED mode. Press 1 first, then to press F. The LED light will flash
twice for every 1 second. At this point you can select the alarm sound
Press 1 to have SIREN for your alarm sound
Press 2 to have TELEPHONE for your alarm sound
Press 3 to have AMBULANCE for your alarm sound.
3. After selecting the alarm sound, the alarm will sound off for a two seconds demonstration. This is simply
for your personal reference.
How to select the Alarm Time?
1. There are 3 different alarm-times, 10secs, 20secs & 30secs, for your selection.
2. Make sure the unit is NOT in its ARMED mode. Press 2 first, then to press F. The LED light will flash
twice for every 1 second. Now you can start to select the alarm-time.
Press 1 to set the alarm-time for 10 seconds
Press 2 to set the alarm-time for 20 seconds
Press 3 to set the alarm-time for 30 seconds
3. The initial alarm-time is set for 20 seconds
What Else?
How to use Briefcase Alarm as a Panic Alarm?
After continuously pressing F for more than 2 seconds, the alarm will immediately go off into its
PANIC mode
When Briefcase Alarm is armed, the Alarm will go off for 20 seconds (initial alarm-time) if an
unauthorized person (thief) attempt; to open the battery cover or cut the wire
Under the ARMED mode, one beep and the flashing of the RED LED every 20 seconds will remind you
that the battery is weak and should be replaced with fresh batteries
Notes:
1. You must enter the Secret Code within the 5-second time limit or the Briefcase Alarm will automatically
revert to the preexisting Secret Code
2. When pressing the buttons on the face of the Briefcase Alarm, a beep must be audible after each
button selection. If a beep is not heard, the button has not been properly entered. This process is
similar to dialing a phone number on a phone keypad
3. When replace new batteries, the secrete code will be erased, so you have to re-set 4 digits secret
codes after replacing batteries
4. If user forget secrete code, please remove batteries & install the batteries again. The old secrete code
would be erased. New secrete code can be set again.
Advertisement
