To Register the Magic Remote Control
To use the magic remote control, register it with your Laser TV first.
1
Turn on the Laser TV and wait for about 10 seconds and then press
the
Wheel (OK) button while pointing the remote control at the Laser TV.
2
The remote control is automatically registered and the registration completion message
appears on the Laser TV screen.
•
If you failed to register the magic remote control, turn off the Laser TV and try again.
To Re-register the Magic Remote Control
1
Press the
SMART and
2
Press the
Wheel (OK) button towards the Laser TV to re-register the magic remote
control.
•
Press the
SMART and
the Magic Remote Control.
•
Press the
BACK button while pointing the remote control at the Laser TV for five
seconds to reset and re-register it.
BACK buttons together for about 5 seconds.
BACK buttons at the same time, for five seconds, to reset
MAGIC REMOTE CONTROL
27