Siemens SpeedStream SS2524 Owner's Manual page 48

SpeedStream Powerline Wireless Router User Guide
"Connection Details"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
"System Data"
Button
Buttons
Connection Details
Access Log
System Data
Refresh Screen
Destination - The Internet address which was requested. If
the URL Filter is enabled, this address will be shown as a
URL. Otherwise, the IP address will be displayed.
Blocked - If the request was blocked by the URL Filter
function, this will display "Yes". Otherwise, it will be blank.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
The IP Address of the SpeedStream Powerline Wireless Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and the
IP addresses allocated to them, use the Network Clients option on
the Advanced menu.
This displays the current name of the SpeedStream Powerline
Wireless Router.
The current version of the firmware installed in the SpeedStream
Powerline Wireless Router.
Clicking this button will open a Window that lists all system
details and settings.
View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method used. See
the following sections for details of each sub-screen.
View details of outgoing connections to the internet.
Display all system information in a sub-window.
Update the data displayed on screen.
44