Pairing The Remote Control - Vivitek NovoEnterprise Quick Start Manual

PAIRING THE REMOTE CONTROL

Before you can use the remote control you must first pair it
with your NovoEnterprise.
To pair the remote control:
OK
A B C
EN-4
1
Power on the NovoEnterprise.
2
With the remote control in range of the NovoEnterprise,
press and hold the Volume + and Volume - buttons
simultaneously for 2 seconds. The left LED will light up
and start blinking.
3
Once the LED stops blinking and stays constantly lit,
pairing is complete.
4
Release the Volume + and Volume - buttons and the LED
will turn off.