Advertisement
OPTION B.
Step 3.
Solar panel is provided with voltage regulator already attached.
If voltage regulator is not attached to Solar panel, connect panel power cable (female) connector to
voltage regulator cable (male) connector.
Step 4.
Follow STEP 2 (OPTION B) to fix cable ties in place, only if required.
Step 5.
Connect voltage regulator cable (female) connector to motor cable (male) connector.
Step 6.
Follow STEP 2 (OPTION B. iii) to fix the voltage regulator onto a suitable surface (wall, Solar panel,
window), if required.
IMPORTANT!
Ensure cable is kept cleat of fabric at all times.
5 | Automate
Programming Instructions | MTSOPLAN-B
™
continued...
iii.
Clean the window or surface with alcohol wipe.
Allow surface to dry.
Peel protective film off adhesive tapes.
Press firmly onto fixing surface.
Apply hand pressure for 5 seconds and check if firmly attached.
Female
Male
ROLLEASE ACMEDA
Advertisement
