Page 2
Authentication takes place automatically the first time the PWR (power) button is pressed, providing it is within the allowable window of operation for that particular keypad and within range of the ACM. Two GREEN flashes, indicate the keypad is authenticated for use, 2 RED flashes indicate that the keypad is not authorized for use.
Page 3
When a vehicle is sold it will be necessary to transition the security system from Lot Mode to Consumer Mode using an ACM Keypad. Once in Consumer Mode the ACM Keypad will no longer have control of the vehicle’s security system.
Page 4
ACM Keypad PIN Codes When PIN Code is enabled for an ACM Keypad, each time the keypad’s power button is pressed it will require a 4 digit PIN code to access vehicles. To access multiple vehicles without re-entering the PIN code, press the CLR button.
Page 6
FCC COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the This device complies with Part 15 of the FCC rules and with RSS-210 of following two conditions: Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and 1.
Need help?
Do you have a question about the ACM and is the answer not in the manual?
Questions and answers