Summary of Contents for Nivea Selfie
-
Page 1: Table Of Contents
Getting Started with Selfie Mobile skin diagnosis system Contents About Selfie & Components • Turn on and off the device • Sleep mode • Re-booting the device • Connect to a Wi-Fi network • Change to USB mode • Charge the device •... -
Page 2: About Selfie & Components
About Selfie Components Selfie USB cable Stander Power button Camera button Micro USB slot Rubber Moisture sensor DC adopter and plug Quick Start Guide (2 USB slots) Optic for battery status Turn on and off the device 1. Push the power button to left. After 3 seconds, 2. Green LED is kept on when the device is ready 3. -
Page 3: Sleep Mode
Sleep mode 1. The device goes to sleep mode after 10 2. Turn the device over to wake up from sleep 3. The green LED blinks on. minutes without using the device. mode. (No LED displayed) Re-booting the device 2. The LED blinks on Red → Green → Blue → Red. 1. -
Page 4: Connect To A Wi-Fi Network
Connect to a Wi-Fi network 2. On the Wall paper of your host device, Apps → 1. Check the SSID of the device written on the 3. Select the SSID from the Wi-Fi networks list. Settings → Wi-Fi. Turn on the Wi-Fi (Drag the serial label. -
Page 5: Charge The Device
Charge the device 1. Connect the device to power adopter by USB 2. While charging the device, the blue LED blinks 3. The blue LED is on when charging is completed. cable. * Only use the chargers, batteries, and cables approved by the supplier. Unapproved adaptors or cables can cause the battery to explode or damage the device.