Transferring Your Results To A Computer Or Pda - Accu-Chek Performa Owner's Booklet

Transferring Your results to a Computer or PDA

You can transfer your stored results to a computer to track, identify patterns, and print.
Transferring Data Directly to a Computer or PDA Using Specialized Software and infrared
Cable
WArning
Individual patient results cannot be identified, so transferring data from meters used for multiple-patient
testing is NOT recommended.
1. Install the software according to the instructions.
2. To transfer the results to a computer, connect the infrared cable according to the instructions.
3. Run the software program and follow the instructions for data
transfer. Make sure the software is ready to accept data from
the meter.
4. With the meter off, press and hold both
on the display alternately flash.
50705_05853397002_EN.indb 43
and until 2 arrows
43
4/24/12 8:32 AM