Page 2
LIST OF NEEDED SUPPLIES • Celution Consumable Set Tissue Collection Waste Bag Container Tubing Set Processing Chamber • Needles: • Celase Enzyme ® (Stored at -15°C to -25°C) 18G x 1.5” 1.02 x 40mm (Celase addition) 18G x 3.5” Spinal 1.2mm x 90mm (Cell output removal) •...
CELUTION PROCESSING STEP 1: DEVICE SETUP DO NOT LOAD THE CONSUMABLE UNTIL PROMPTED BY THE DEVICE . Hang waste bag . Lock wheels (x4) and turn on power switch 3. Attach collection container Close container port Open pump, then insert Route tubing around the tubing in to 6 valves and the handle...
Page 4
CELUTION PROCESSING STEP 1: DEVICE SETUP (CONTINUED) Insert tubing in the optical 6. Insert tubing in pressure sensors by flossing back and forth sensor by gently pressing down Remove caps from both the Press down firmly to fully insert processing chamber and tubing processing chamber set, then connect tubing 10.
Page 5
CELUTION PROCESSING STEP 1: DEVICE SETUP (CONTINUED) DO NOT ATTACH THE LACTATED RINGER’S BAG UNTIL PROMPTED BY THE DEVICE! Spike a 1L bag of 37°C Lactated Ringer’s, then place on hanger STEP 2: TISSUE ADDITION Celase addition port “2” Adipose Tissue Lipoaspirate Tumescent...
Need help?
Do you have a question about the celution GP and is the answer not in the manual?
Questions and answers