Wunda T02 User Manual

WUNDATRADE
...a division of WUNDA GROUP PLC
Pipe cutters must be used to
ensure a clean cut and square
end to the pipe.
1
Pipe Cutter
Pipe Cutter & Reamer User Guide
✆ 0800 083 2677
www.wundatrade.co.uk
1
✘
Operating instructions.
1 Open pipe cutters fully by pulling handles
2 Insert pipe into pipe cutter jaws begin
2
✔
T02
fully apart.
to close pipe cutters by squeezing
handles together, To close the jaws
repeatedly squeeze the handles together
and then release. This will cause the jaws
to close and cut the pipe, fully cut through
the pipe ensuring the end of the pipe is
cut square.