Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
The Ultimate in Fall Protection
User must read and understand these instructions
before assembling or using this equipment.
WARNING: This product is part
of a fall arrest system. These
instructions must be provided to all
users and rescuers (see Section 7 -
Terminology) using this equipment.
The user must read and understand
these instructions before assembling
or using this equipment. The user
must follow the manufacturer's
instructions for each component
of the system. Manufacturer's
instructions must be followed for
proper use and maintenance of this
equipment. Alterations or misuse of
this equipment, or failure to follow
instructions, may result in serious
injury or death.
IMPORTANT: Before using this
equipment record the product
identification information from
the ID label in the 'Inspection and
Maintenance Log' at the back of this
manual.
IMPORTANT: If you have questions
on the use, care, application, or
suitability for use of this safety
equipment, contact Capital Safety.
EMPLOYEE TRAINING: This manual is intended to meet industry standards, including OSHA, ANSI Z359.1, and CE
EN795 and should be used as part of an employee training program as required by OSHA.
FORM NO: 5902345
REV: F
EN795: 1996
CE Type Test
CE Production Quality Control
No. 0086
BSI Product Services
P.O. Box 6221, Kitemark Court
P.O. Box 6221, Kitemark Court
Davy Avenue
Milton Keynes
MK1 9EP UK
Class B
No. 0086
BSI Product Services
8517714
8517715
Davy Avenue
Milton Keynes
8517716
MK1 9EP UK
8517717
8517718
User Instruction Manual
Ladder Fall Arrest System
Model Numbers:
8517719
8530658
8530140
8530659
8530555
8530674
8530584
8530682
8530652
8530683
© Copyright 2016, Capital Safety
8567715
8567717
8567719
Advertisement
Related Manuals for DBI SALA FlexiGuard 8517714
Summary of Contents for DBI SALA FlexiGuard 8517714
- Page 1 EN795: 1996 Class B Ladder Fall Arrest System CE Type Test CE Production Quality Control Model Numbers: No. 0086 No. 0086 BSI Product Services BSI Product Services 8517714 8517719 8530658 8567715 The Ultimate in Fall Protection P.O. Box 6221, Kitemark Court P.O.
- Page 3 Figure 1 - Parts Identification Inner Jacks Handrail (2) Swivel Wheel Overhead Anchor Point Post Fixed Wheel Ladder Support Tubes Outriggers and Jacks Davit Winch Post Operators Setup and Use Lifting Kit Decal Plate Platform Step...
- Page 4 1.0 APPLICATIONS 1.1 PURPOSE: Personal Protective Equipment against falls from a height. The adjustable Ladder Fall Arrest System (Ladder FAS) with Fall Protection combines easy access to elevated work areas with fall protection from the ground for the duration of the work being performed. Each unit includes two collapsible masts.
-
Page 5: System Requirements
2.0 SYSTEM REQUIREMENTS 2.1 COMPATIBILITY OF COMPONENTS: DBI-SALA equipment is designed for use with DBI-SALA approved components and subsystems only. Substitutions or replacements made with non-approved components or subsystems may jeopardize compatibility of equipment and may effect the safety and reliability of the complete system. -
Page 6: Operation And Use
NOTE: Large throat opening snap hooks should not be connected to standard size D-rings or similar objects which will result in a load on the gate if the hook or D-ring twists or rotates. Large throat snap hooks are designed for use on fixed structural elements such as rebar or cross members that are not shaped in a way that can capture the gate of the hook. - Page 7 B. WORK SITE GEOMETRY: The use of the Ladder FAS must be consistent with the geometric requirements stated in the associated manufacturer’s instruction manuals. Check for obstructions or sharp edges in the work path. Avoid working where the user may swing and hit an object, or where lines may cross or tangle with that of another worker.
- Page 8 Figure 4 - Procedure for Use 9 / 10 9 / 10 5 Detail 6 in.-12 in. (153mm-305mm 6 in.-12 in. (153mm-305mm Locking Pin Outside Jacks Inner Jacks Winch Handle 3.5 PROCEDURE FOR USE OF THE LADDER SYSTEM: Step 1. Move the unit 1-3 feet (0.3-1m) away from work area/object. Step 2.
- Page 9 Figure 5 - Safe Work Radius 6 Ft (2m) maximum safe work radius from anchor point MAXIMUM 10 ft (3 m) SRL 3 Ft (1m) maximum safe work radius from the leading edge of the platform Optional Scissor Jack 6 Ft (2m) maximum safe work radius from anchor point MAXIMUM 10 ft (3 m) SRL WARNING: Do not work outside of outrigger “footprint.”...
- Page 10 Step 9. When you reach the platform at the top, you may Figure 6 - SRL need a tag line to reach the davit SRLs. You must Connections remain connected to at least one SRL while transferring connections from the Overhead Anchor Point Post to the Davit SRL.
- Page 11 4.0 INSPECTION 4.1 VISUAL INSPECTION: A complete visual inspection should be performed on the Ladder FAS equipment you are using prior to the operation. The following items should be checked, and the results recorded on the “Inspection and Maintenance Log” sheet at the back of this manual.
-
Page 12: Warning Labels
4.3 Functional Inspection A functional check should be performed on the Ladder FAS prior to every use. The following functional tests should be done; and the results recorded on the “Inspection and Maintenance Log” at the back of this manual. A. -
Page 13: Specifications
6.0 SPECIFICATIONS • Working Load: Maximum of two persons with a combined weight of 310 lbs. (141 kg) per person. • Materials and Construction: General Construction: Welded Steel/Aluminum Finish (Aluminum): Yellow Powder Coat Hardware Material: Zinc Plated 7.0 TERMINOLOGY Authorized Person: A person assigned by the employer to perform duties at a location where the person will be exposed to a fall hazard (otherwise referred to as “user”... - Page 15 INSPECTION AND MAINTENANCE LOG SERIAL NUMBER: MODEL NUMBER: DATE PURCHASED: DATE OF FIRST USE: INSPECTION DATE INSPECTION ITEMS CORRECTIVE ACTION MAINTENANCE NOTED PERFORMED Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By: Approved By:...
- Page 16 LIMITED LIFETIME WARRANTY Warranty to End User: CAPITAL SAFETY warrants to the original end user (“End User”) that its products are free from defects in materials and workmanship under normal use and service. This warranty extends for the lifetime of the product from the date the product is purchased by the End User, in new and unused condition, from a CAPITAL SAFETY authorised distributor.