Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Majestic ONE PU
- Page 1 U S E R G U I D E...
-
Page 2: Table Of Contents
CONTENTS Information Safety rules Take care of your longboard Specification Warning Electric parts When you use your board you are exposed Longboard parts to numerous risks of the obstacles encountered Longboard parameters on the road, collisions, fallsand loss of control Replacing wheels to All Terrain over the board. - Page 3 INFORMATION The buyer will use the equipment on their own responsibility and at his own risk and he waives any claims, including recourse, against the manufacturer/seller that may arise in connection with the incorrect use of equipment, especially use contradictory with the purpose of the product by the buyer and the people to whom he makes the product available for use, including waiving any claims against the producer/seller due to an accident and related damage to health...
-
Page 4: Safety Rules
1. Always ride carefully, complying with traffic regulations. 4. Never unscrew the electronic parts of the longboard. Opening 2. While longboarding, you should avoid: the battery cover is at risk of electric shock and may void your warranty (except replacement of a battery purchased from the manufacturer of electrical longboards Majestic Boards). 5. Keep your fingers, clothes and hair away from movable parts of the board, i.e. a strap, motor or wheels. 6. During the ride there is a possibility of small objects getting into the steep uphill or downhill drive belts that may block the engine. -
Page 5: Take Care Of Your Longboard
• The battery used in the board should come only from the manufacturer in a loss of warranty. of electric longboards - Majestic Boards. Using other batteries results 11. Before each ride on the electric longboard, make sure all the screws are in the loss of guarantee. -
Page 6: Specification
SPECIFICATION • Electric parts Front Truck Front Wheels Motor 1200W (total power in version with two 2400W motors) Charging Port Brushless USB Port Battery Skateboard 11.8 Ah Battery cove Deck Lithium-ion Voltage 21,6 V Power Button Motor controller Bushings Bushings Lights indicating the battery charge level are located on the control Rear Wheels board cover. All lights are glowing green when the battery is fully... -
Page 7: Longboard Parts
SPECIFICATION MAJESTIC ► ONE PU ONE AT PRO PU PRO AT • Longboard parts Weight (kg) Deck size 90 x 23 90 x 23 90 x 23 90 x 23 Wheel size 80/97 mm 7′ pumped 80/97 mm 7′ pumped Deck Length – 90 cm Original Original Rims Majestic Majestic Width –... -
Page 8: Replacing Wheels To All Terrain
SPECIFICATION 2. Replacing the drive wheel a) use the included small Torx key to unscrew drive belt cover. • Replacing wheels to All Terrain b) using small Torx key loosen 4 screws securing the motor (loosen, do not unscrew). Move the motor down along the grooves in the mount. Instructional videos available at producent's website. c) using the T-Tool provided with the set, unscrew the nut fixing the PU wheel. Tools needed: T-Tool, Torx key 4 d) remove the spacer from the PU wheel. -
Page 9: Replacement Of Pu Wheels
SPECIFICATION • Replacement of PU wheels m) grasp the engine with one hand, move it upwards so that the toothed 1. Replacement of wheels without a drive belt is stretched. Use small force. With the other hand, tighten the 4 screws fixing the engine with a small Torx key. The strap should bend a) unscrew the nut fixing the PU wheel using the T-Tool provided with the lightly under the pressure of the finger, and the wheel should rotate set. without much resistance. (Important! The engine mount should be b) remove the spacer from the PU wheel. tightened only with a matching Torx key from the set, inserting it to the end and tighten it with sensitivity so that you don't twist it). - Page 10 SPECIFICATION d) pull off the PU wheel. screw the nut so that the wheel does not slack and rotates freely on the axis. If the wheel isn't in the proper position yet, tighten the nut until Due to the fitting of the parts, you need to pull off the drive wheel using everything fits. After fitting unscrew the nut slightly so that the wheel more strength. Relax - nothing will go wrong ;) can rotate freely. 1) Only the wheel has been pulled off - leave the rack in place and press j) fasten the engine rack cover using the included key. the PU wheel with bearings on top of the set.
-
Page 11: Remote Control Functions
• Power on / off the remote REMOTE CONTROL FUNCTIONS Press the ON/OFF Button for 2 seconds (do not press while riding). Control Wheel Press the ON/OFF Button Speed-up / Switch to turn menu pages. Braking (Drive-Reverse) Settings + and - • Start Remote battery Dead mans display trigger Settings / Home Electric longboard Real-time speed km/h battery display... - Page 12 REMOTE CONTROL FUNCTIONS • Braking mode level • Remote-board pairing BRAKE MODE Gentle BRAKE MODE Medium Ready to pair BRAKE MODE Hard Press ON/OFF Button to braking mode level, use CONTROL WHEEL to each Complete Pairing braking level. Press DEAD MANS TRIGGER to return to home page. Turn on the remote and press ON/OFF Button to remote-board pairing page, please follow the guide to complete pairing. When it's complete, the lights on electric skateboard will not flash.
- Page 13 REMOTE CONTROL FUNCTIONS • Battery voltage • Remote calibration Remote voltage 3. 70V CALIBRATION CALIBRATION CALIBRATION CALIBRATION Electric 0. 00V longboard MED MIN MAX MED COMPLETE voltage Press ON/OFF Button to battery voltage page for real time monitoring of the battery voltage. Electric skateboard voltage will show 0.00V if the re- mote is not paired with the board or electric longboard is turned off. Press DEAD MANS TRIGGER to return to home page. 1. Push CONTROL WHEEL all the way forward and press •...
-
Page 14: Wheel Size
REMOTE CONTROL FUNCTIONS INSTRUCTIONS FOR BEGINNERS PREPARING FOR A RIDE • Wheel size • Go to the square/car park where you can find a lot of open space for lear- WHEEL SIZE ning to manoeuvre. 80mm / AT 80mm 97mm • In the beginning, it is advisable to learn how to use a longboard without switching on the electric drive. -
Page 15: Return Of Ordered Products
RETURN OF ORDERED PRODUCTS According to consumer rights act of may 30, 2014 (OJ 2014 pos. 827 as amended) customer may withdraw from the contract of good sales concluded through our store during 14 days from receiving the parcel without any reason IMPORTANT and at no cost, except for the costs of shipment, if the customer has chosen When accelerating and braking on an electric longboard, pay... -
Page 16: Manufacturer Guarantee
When the product is worn out or gets damaged before the guarantee expi- The warranty is not applicable, even if it is still valid, in the following cases: ration, the customer is entitled to send the product and guarantee card back to the manufacturer and get it repaired or have the faulty parts replaced • damage caused by water that exceeds the degree of resistance IP54 without payment. Majestic Boards offers their customers replacement parts • failure of the product due to the exposure to another matter and discounts in case of help from an authorised service centre even after • failure of the product due to inappropriate use of the longboard the warranty expiration. - Page 17 Majestic Boards is not responsible for incorrect use of equipment, in particular use contrary to the intended use of the product. This user guide may change in the future.
Need help?
Do you have a question about the ONE PU and is the answer not in the manual?
Questions and answers