Advertisement
Premier Elite SmartKey User Guide
1. To turn on press
2. To Arm press
3. To Part Arm press
4. To Disarm press
5. To activate Panic Alarm press
hold together for 4 secs.
6. To turn off press
Note: The SmartKey will power off after
20 seconds of no activity.
ALARM STATUS LED's
• Green LED on = Disarmed
• Orange LED flashing = Part Arming
• Orange LED on = Part Armed
• Red LED flashing = Arming
• Red LED on = Armed
• All 3 LED's flashing together = Alarm
• All 3 LED's cycling = Panic Alarm
SMARTKEY STATUS LED
• Green LED on = Connection successful
• Red LED on = Connection unsuccessful
Product Type
GCC1010-3
GCC2000-3
GCC3000-3
and hold for 4 secs.
.
.
.
and hold for 4 secs.
Frequency Band
868.0 - 868.6 MHz
433.05 - 434.79 MHz
866.0 - 866.6 MHz
SmartKey status LED
FULL ARM
PART ARM
DISARM
POWER
(hold 4 secs)
Alarm status LED's
DISARMED
PART ARMED
ARMED
INS469-5
and
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Texecom Premier Elite SmartKey
Summary of Contents for Texecom Premier Elite SmartKey
- Page 1 Premier Elite SmartKey User Guide 1. To turn on press and hold for 4 secs. 2. To Arm press 3. To Part Arm press 4. To Disarm press 5. To activate Panic Alarm press hold together for 4 secs. 6. To turn off press and hold for 4 secs.
- Page 2 (excludes Premier Elite iXP-W). 1. The Premier Elite SmartKey prox symbol must be held over the prox symbol on the keypad or iProx unit. 2. The Premier Elite SmartKey prox function will normally work at distances of up to 3cm, however it should be noted that distances can and do vary.
- Page 3 3. Presenting the Premier Elite SmartKey to the keypad is the same as entering a code except that it is a single action as opposed to a multiple action. 4. The control panel will which user/SmartKey has been presented. To program the prox function please refer...
- Page 4 EN50131-3:2009, EN50131-5-3 Grade 2 Class II Warranty: 2 years (excludes battery) As the Premier Elite SmartKey is not a complete alarm system but only a part thereof, Texecom cannot accept responsibility or liability for any damages whatsoever based on a claim that the Premier Elite SmartKey failed to function correctly.
Need help?
Do you have a question about the Premier Elite SmartKey and is the answer not in the manual?
Questions and answers