Advertisement
Attention:
1.he regular product for sale is a kit (remote and controller).
The user can re-programme freely as needed. One remote can control countless controllers, but one
controller can only be controlled by six remotes (Max).
2.Please check the battery installation and controller(totally discharge the power), when you programme
after switching off and switching on.
Connection:
Attention
●Please check whether the input voltage of the constant voltage power supply is in accordance with the
controller, and please check the connection of both the cathode and anode, otherwise the controller will be
broken.
●.Please do not connect wires with power on.Please switch on only when it is in right connection and no
short circuit.
●Please keep your figure off the touching ring when installing the batteries, to improve its sensitivity, and
use the remote (3 seconds later) after the installation.Please reinstall the batteries, if the touching ring is
found low-sensitivity.
●.Please do not use the controller in the place with widely range metal area or strong electromagnetic
wave nearby, otherwise, the remote distance will be seriously affected.
Caution
●1.Thanks for using 2.4G RGB LED touching remote control system,please read the instruction carefully
before using. It states that you have read this instruction and accepted the caution when you start to use.
●2.Sune-LED Solutions Corp. reserves the right of final explanation and amendment to the products.Data
is subject to change without prior notice.
Advertisement
