Advertisement
Step 4. Unseat the SIM Card.
Use your thumb or finger and gently
press the SIM Card in and release
the pressure. The SIM Card will pop
up out of the slot.
Step 7. Insert the new SIM Card.
CAUTION: Make sure you
orientate the SIM card as shown.
Place the SIM Card in the slot and
gently push down the card until you
hear a click. Release the pressure.
The SIM Card should remain fully in
the slot.
* Note: The VAIO SmartWi Connection Utility Guide provides detailed information on how to use the SmartWi
Connection Utility. To view the guide, click Start, point to All Programs, and click VAIO Control Center. Make
sure that the Categories tab page is active. Click the Documentation folder, and then click VAIO SmartWi
Connection Utility Guide.
P/N 994636900
Rev. A
SZ1 Series - Replacement Instructions
Step 5. Remove the SIM Card as
shown.
Step 8. Reinstall the Battery Pack.
Align the slots on the battery to the
guide rails on the computer and
gently push the battery pack back in
place until the tabs snap back in
place.
2/2
Cingular SIM Card
Step 6. Punch the SIM Card out of
the card.
Step 9. Start the VAIO SmartWi
Connection Utility.*
1. Start your computer.
2. Click the SmartWi
3. From the SmartWi main
4. Call (888) 739-VAIO (8246)
Connection Utility icon in
the task bar.
screen, click the Cingular
button, and then click in the
Cingular Connection
Manager launch area below
the button.
to activate your account.
Advertisement
