Summary of Contents for Energy Saving Products ESP Series
- Page 1 Heating, Cooling and Indoor Air Quality Systems Variable Speed Heat Pump 3 Ton 5 Ton ESP-36 ESP-60 Installation and Operation www.hi-velocity.com Module-VAR-Variable-Speed-Heat-Pump-060118...
- Page 2 (60 cm) More than 12” (30 cm) Maintain Channel Air Inlet More than 24” (60 cm) Air Outlet More than 80” (200 cm) 24” is necessary between 2 outdoor units (600 mm) 24” (60 cm) © 1995-2018 Energy Saving Products Ltd.
- Page 3 Installation & Specs (3/8) www.hi-velocity.com ESP Variable Speed Heat Pump Specifications - Dimensions ESP-36 Model ESP-36 38” 32” 16.25” 24.5” 13.4” 14.4” 15.6” (965 mm) (813 mm) (413 mm) (624 mm) (340 mm) (366 mm) (396 mm) © 1995-2018 Energy Saving Products Ltd.
- Page 4 Installation & Specs (4/8) www.hi-velocity.com ESP Variable Speed Heat Pump Specifications - Dimensions ESP-60 Model ESP-60 38” 53” 16.25” 24.9” 14.6” 15.9” 17.6” (965 mm) (1346 mm) (413 mm) (633.5 mm) (370 mm) (404 mm) (448mm © 1995-2018 Energy Saving Products Ltd.
-
Page 5: Refrigeration Circuit
The mid coil port is located on one of the “U-bends” in the middle of the coil. This is where the mid coil temperature sensor should be located and secured. • Both of these temperature sensors/ports should be insulated with cork tape to ensure a true temperature reading of the tube and not of the ambient temperature. © 1995-2018 Energy Saving Products Ltd. -
Page 6: Interface Panel
Stage Heat (Inverter) W2 - 2nd Stage Heat (Hydronic) 24V OUTPUT OUTDOOR UNIT INVERTER HEATPUMP INTERFACE PANEL *Temperature sensors can be extended, use same gauge or larger. L/L1 N/L2 G 208-240V / 50-60HZ May 2018 © 1995-2018 Energy Saving Products Ltd. -
Page 7: Outdoor Unit Specifications
Heating 7°C (44°F)DB, 6°C (43°F) WB Outdoor/ 21°C (70°F) DB Air Entering Indoor Unit Nominal Operating Range -10°C (14°F) WB to 50°C (122°F) DB Sound pressure level is influenced by the surroundings, therefore it may vary upon location. © 1995-2018 Energy Saving Products Ltd. - Page 8 Our facilities house Administration, Sales, Design, Manufacturing, as well as Research & Development complete with an in-house test lab. Energy Saving Products prides itself on Customer Service and provides design services and contractor support.
Need help?
Do you have a question about the ESP Series and is the answer not in the manual?
Questions and answers