Siemens M65 User Manual page 88

Data services
Basic setting and activation of the
connection profiles for data trans-
mission such as
The phone default setting varies
from service provider to service pro-
vider.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will find the
current settings for the service pro-
vider on the Internet at this address:
www.siemens-mobile.com/customercare
in the "FAQ" section.
Select profile
Select the profile.
I
Confirm selection.
C
Set profile
Select the profile.
I
§Options§
Open menu.
Open the selection.
§Edit§
Select
GPRS
I
Make the settings as spec-
§Edit§
ified by your service pro-
vider.
MMS, WAP.
CSD settings, and/or
settings.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will find the
current settings for the service pro-
vider in the Internat at this address:
www.siemens-mobile.com/customercare
in the "FAQ" section.
Make the settings.
I
Authentication
Activate or deactivate encrypted
Internet dial-up (CSD connections
only).
Setup 87