Led flood lighting (remote driver type) (14 pages)
Summary of Contents for GigaTera TM Series
Page 1
TM-Series LED Flood Lighting User Guide Document Revision - V 0.61_E TM-60 Notice to customers The wiring for light system should be carried out by a certified electrical engineer. Customers must make request to a shop that can handle the electrical work.
Page 2
Product Installation Guide Fixing hole : Ø13 Step.1 Fix the bracket. Fix the bracket of the TM product firmly to the installation location. ▶ Bracket fixing hole (Refer to Page 11) M8 Hexagon bolt Step.2 Fix the device. Set the TM product at the desired angle, Fix the device and bracket.
Page 3
M6 Hexagon bolt Step.3 Fix the module. Set the module of the TM product at the desired angle, Fix it firmly. General type Dimming type AC Cable AC Cable Dimming Cable Step.4 General type / Dimming type General type : Only the power cable of the light system is provided. Dimming type : The power and control cables of the light system are provided.
Wiring diagram AC-N White AC-L Black AC-F.G Green / Yellow AC wire connection Adjust the wire length, Then connect the TM product and the power line (AC). ( DC + ) Blue ( DC - ) Brown Dimming line connection Adjust the wire length, Then connect the TM product and the power line (DC).