Unpairing The Remote; Media Sources - Chrysler Uconnect Theater Manual

NOTE:
• There will be a touchscreen notification message when
pairing is successful/unsuccessful. Repeat the above
steps to pair the second remote.
• Test to make sure the remote is successfully paired by
dragging your finger across the gesture pad. If you do
not see the on screen arrow, try using the "Screen"
button to switch between screen one and screen two to
make sure the remote is controlling the intended screen.
• If remote is ever non-operational, try pairing remote.
• The system can accommodate up to 10 paired remote
controls.

Unpairing The Remote

In events such as updating the Uconnect Theater software,
or taking a remote to another vehicle, the remote will need
to be unpaired from your Uconnect Theater system. To
unpair the remote, follow the procedure below:
1. Select "Manage Remote Controls" from the Remote
section of Settings" and follow the on screen instruc-
tions to complete the unpairing process.
UCONNECT THEATER — IF EQUIPPED
2. Push and hold the "Screen", "Down Arrow", and
"Play/Pause" buttons for 5 seconds, or until the remote
screen indicator light flashes.
3. Once complete, the remote will be ready to pair again.
NOTE: There will be a touchscreen notification message
when unpairing is successful. Repeat the above steps to
unpair a second remote.

Media Sources

9
1