Taking A Screenshot; Screen Locking; Language - TomTom BRIDGE User Manual

If you have finished using the device it is a good idea to clear your personal data before you pass
the device back to the owner.
To clear your personal data, do the following steps:
Note: Software updates can only be downloaded using a Wi-Fi connection.
1. If you are using a personal
2. Select the Settings app.
3. Select Backup & reset.
4. Select Clear personal data.
5. Select Clear, then select Clear again.
Your device automatically switches off and clears your personal data.

Taking a screenshot

If you need to make a picture of the screen of the TomTom BRIDGE Hub, for example to show the
owner an error that has occurred, do the following:
1. Press and hold the On/Off button until the pop-up menu is shown.
2. Select Take a screenshot from the pop-up menu.
A screenshot is taken of the screen behind the pop-up menu.
Tip: Open the Gallery app on your TomTom navigation app to view the screenshots you have
made.
3. Connect your TomTom navigation app to your computer and
The screenshots are in the pictures folder in the TomTom navigation app Internal Storage.

Screen locking

When using your TomTom BRIDGE Hub, certain apps or features may be locked. The features that
are locked and the reasons for doing so are at the discretion of the device owner. Some typical
reasons for a device owner to use screen locking are as follows:
 To prevent a customer from speeding.
 To increase safety by minimising driver distraction.
To prevent device theft.

When you select a locked item in the home screen, you see a message. The message may say
Screen locked for safety or something else because it can be customised by the device owner.
Even when an item is locked, you can still do the following:
Use home, back and volume buttons.

Select the screen lock message to make it disappear.

 Respond to, for example, a low battery message.

Language

The language used on the TomTom BRIDGE Hub is also used on the apps installed on the device.
To change the device language, do the following:
1. Select the Home button.
2. Select the Settings app.
3. Select Language & input, then select Language.
4. Select the language you want, then select OK.
Your device language changes.
memory card, remove the memory card from its slot.
16
transfer the screenshots.