Advertisement
Instruction
Front Page
- Logo
Manual
BS77
Back view
AUX IN
USB
Power On/Off
Press and hold
AUX IN
Use the included audio cable to connect the audio output
of your device to the Line In input on the speaker.
USB (Charging)
Use the included USB adapter to connect to the USB on
the speaker. Charging status indicator on Play/Pause key:
1) Blinking of Play/Pause: Charging
2) Solid of Play/Pause: Charging cycle done
Reset
Use a pin to reset the system
Power On/Of
Reset
Advertisement
Table of Contents
Summary of Contents for Synchross BS77
-
Page 1: Back View
BS77 Instruction Front Page Back view Power On/Of - Logo Manual AUX IN Reset Power On/Off Press and hold AUX IN Use the included audio cable to connect the audio output of your device to the Line In input on the speaker. -
Page 2: Touch Panel
Press and hold to start searching Bluetooth source 1.) Blinking: Speaker attempting to connect to a paired device. Suggestion: Despite BS77 is IPX7-RATED Waterproof, the sensibility of 2.) Solid: Speaker connected to paired device. the touch panel will be better induced in dry condition. We recommend 3.) If unable to connect within five minutes, Bluetooth stop... -
Page 3: Technical Information
BS77 Technical information 1. Power supply rating Input: 100~240VAC，50Hz/60Hz 2. Input power rating Input: 5VDC/1A 3. Weight 1.28 lb. (490 g) 4. Dimensions (W/H/D) 7.3 in x 2.3 in x 2.2 in (185.3mm x 57.4mm x 56mm) 5. Temperature range for use 0∘- 45∘C (32∘... -
Page 4: Safety Information
WARNING: LOGO IMPORTANT SAFETY INFORMATION • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not place any naked flame sources, such as lighted candles, on or SAFETY INFORMATION near the apparatus. -
Page 5: Fcc Statement
【FCC Statement 】 WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to • Do not subject battery pack to mechanical shock. the following two conditions: • In the event of a battery pack leaking, do not allow the liquid to come (1) This device may not cause harmful interference, and in contact with the skin or eyes. -
Page 6: Rf Exposure Information
Canada The standards compliance label on the Brocade 6510 contains the CE This device complies with Industry Canada license-exempt RSS standard(s). mark which indicates that this system conforms to the provisions of the Operation is subject to the following two conditions: (1) this device may not following European Council directives, laws, and standards: cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the BS77 and is the answer not in the manual?
Questions and answers