Related Manuals for UbiBot WS1 Pro
Summary of Contents for UbiBot WS1 Pro
- Page 1 E-mail: support@ubibot.io Website: www.ubibot.io Manufacturer: Dalian Cloud Force Technologies CO., LTD...
- Page 2 USER GUIDE WS1 Pro – the Smartest Multi-Sensor IoT Device www.ubibot.io...
-
Page 3: Table Of Contents
CATALOG INTRODUCTION DATA EXPORTATION VIA PC OFFLINE TOOLS TECHNICAL SPECIFICATIONS ERROR CODES TECHNICAL HIGHLIGHTS TROUBLESHOOTING DEVICE OPERATIONS PRODUCT CARE DATA SYNC MODES WARRANTY INFORMATION APP INSTALLATION WARRANTY CARD WIFI SETUP REPAIR HISTORY MOBILE DATA* SETUP... - Page 4 INTRODUCTION The UbiBot® WS1 Pro is a smart multi-sensor device with both WiFi and mobile data* capabilities. It makes environmental monitoring easier than ever with its accurate sensors and automatic wireless data synchronisation. The device comes with a free subscription to our advanced IoT Platform offering custom monitoring, analysis, reports and alerts.
- Page 5 INTRODUCTION Status Indicator Micro USB 1 Micro USB 2 Ambient Light Power Button Sensor Menu Button Micro USB 1 Used for USB charging or external DS18B20 temperature probe (optional extra). Also provides PC connectivity. Micro USB 2 Used for USB charging or external DS18B20 temperature probe (optional extra). Optional built-in RS485 ModBus...
- Page 6 INTRODUCTION Overview of LCD Display Temperature Ambient Light USB Connected Error Code × × SIM Installed* X100 Mobile Data Strength Leak Warning* Storage usage Status Disk Formatting EXT1 EXT2 WiFi Setup Mode Sending Data Relative External External Network Connection/ Failure Humidity Temp/Hum.
-
Page 7: Technical Specifications
TECHNICAL SPECIFICATIONS WiFi, 2.4GHz, channels 1-13 Flame resistant ABS + PC Micro USB power (DC 5V/2A) 4.96'' x 0.88'' x 3.38'' Built-in Memory: >300,000 sensing data Supports Micro SIM card (15mm x 12mm x 0.8mm) ℃ , 10-90% RH... -
Page 8: Technical Highlights
TECHNICAL HIGHLIGHTS The UbiBot WS1 Pro uses state-of-the-art industrial-grade sensors from Sensirion and Texas Instruments. The device integrates these sensors to create Temperature Sensor Humidity Sensor Precision ± 0.3℃ Precision ± 3%RH ① Range -20 to 60℃ Range 0—100% Accurate... - Page 9 DEVICE OPERATIONS Switch On To switch the device on, press and hold the power button for 3 seconds until the indicator starts blinking green. Release the button and the indicator will turn off after a couple of seconds. The device is now on. Switch Off To switch the device off, press and hold the power button for 3 seconds.
-
Page 10: Device Operations
8 seconds. Release the buttons when the indicator is con- stantly flashing red. ALL STORED DATA WILL BE LOST IF YOU RESET YOUR DEVICE TO DEFAULT SETTINGS! REMEMBER TO SYNCHRONISE THE SENSING DATA TO THE UBIBOT® IoT PLATFORM OR EXPORT THE DATA TO YOUR COMPUTER BEFORE RESETTING IT. IMPORTANT... -
Page 11: Data Sync Modes
DATA SYNC MODES Sync via Mobile Data* Sync via WiFi The device includes a SIM card The device supports fast, slot to allow mobile data sync if secure data sync over WiFi WiFi is unavailable. using 2.4GHz, channels 1-13. Direct Data Access without Network Automatic Network Selection The device continues to collect data even The device can preferentially... -
Page 12: App Installation
App INSTALLATION Download the App from www.ubibot.io/setup Search for “UbiBot” on the App Store or Google Play. (The UbiBot App requires Android 6.0+, iOS 9.0+) ＰＣ Ｏｆｆｌｉｎｅ Ｔｏｏｌｓ Ｉｎｓｔａｌｌａｔｉｏｎ Download the Tool from www.ubibot.io/setup (The PC Offline Tools needs Winows 7+) Please note that this tool is specially used for offline data exportation and pro-... -
Page 13: Wifi Setup
WiFi SETUP Launch the App, register an account if needed and log in. On the home screen click the “ ” to add your device. Scan the QR code on the back of the device, or manually enter the serial number. Device Management Add your device Scan the QR code... - Page 14 The device will ask you to enter your ＷＬＡＮ WiFi password. Check that the correct ＷＬＡＮ SSID is selected and enter the password. Ｕｂｉｂｏｔ－５０８４６ The App will now prompt you to go to your phone settings screen. Change to the UbiBot-xxx network and return to the App.
- Page 15 WiFi SETUP The device will now complete the setup process, register with the server and you entered the correct WiFi details in step 3. Ｄｅｖｃｉｅ Ｓｅｔｕｐ Ｓｕｃｃｅｓｓｆｕｌ！ ...
- Page 16 MOBILE DATA * SETUP With the device off, insert a Micro SIM card into the slot in the direction shown (with the notch facing out and the silver contacts downwards). Now switch the device on. Ｍｉｃｒｏ ＳＩＭ Ｓｌｏｔ Ｍｉｃｒｏ ＳＩＭ Insert a Micro SIM card into the slot Depending on the specific model purchased.
- Page 17 MOBILE DATA * SETUP Launch the app, register if needed and log in. On the main screen, click the “+” to add your device. Scan the QR code on the back of the device, or manually enter the serial number. Please select your operator and make sure the APN info.
- Page 18 PC Offline Tools. Note: only USB1 supports PC connectivity. My Device WiFi SSID WiFi Password Encryption Mode Serial No.: 42H0WS1Pro Channel ID: 335 Device Name Latest Data Product ID ubibot-ws1p-io Storage Used 0B/20G Network Usage 0B/20G Export Data...
- Page 19 Please refer to the Troubleshooting section 4 on page 21. Failed to Connect to Server ０３ Please refer to the Common Qestions at www.ubibot.io/category/faqs. Device Activation Failed ０４ Please refer to the Troubleshooting section 1 on page 18. Data Save Failure ０５...
- Page 20 ERROR CODES Incorrect Data Format This can happen when there is a power disruption while saving data. Data Sync Failed Please refer to the Troubleshooting section 2 on page 19. No SIM Card Found Please check the SIM card is correctly inserted. Mobile Data Network Failure Please check your SIM card is set up correctly and has been activated.
-
Page 21: Troubleshooting
TROUBLESHOOTING 1.Device setup failure when using the UbiBot App There are several factors that can affect the setup process. The followings are common issues: WiFi setup mode: Make sure you turn on the WiFi setup mode. (The device indicator ①... - Page 22 Make sure your device's WiFi router has a working Internet connection (for instance, ③ try to access www.ubibot.io using a mobile connected to the same WiFi). If you are using mobile data, check that your SIM card is activated. If it is, check that ④...
- Page 23 TROUBLESHOOTING 3.Can I Use the Device without a Network Connection? How do I Access the Data? The device will continue working without a network connection and can store over 300,000 readings in its memory. Real-time readings are displayed on screen and you can access the data in the following ways: Move the device to an area where there is a WiFi connection which the device can ①...
- Page 24 6.Failure to Download Data Using the PC Offline Tools Please ensure you are using a USB data cable with 4 wires. Many cheap USB cables are only able to provide power. For any other problems, please visit www.ubibot.io/category/faqs. Alternatively, email customer support at support@ubibot.io to get assistance.
- Page 25 PRODUCT CARE Please always follow the instructions contained in this manual. The device is not waterproof. Please keep away from water during opera- tion, storage and shipping. The optional DS18B20 temperature probe is water proof. Always mount the device on a stable surface. Keep away from acidic, oxidising, flammable or explosive substances.
-
Page 26: Warranty Information
WARRANTY INFORMATION 1. This device is warranted to be free of defects in materials and workmanship for a period of up to one year from the original purchase date. This warranty does not cover damage caused by normal wear, misuse, abuse or incorrect repair. To claim under this limited warranty and to obtain on how to pack and ship the product back to us. - Page 27 WARRANTY CARD Thank you for buying the UbiBot WS1 Pro. If you have any problems and wish to claim under the limited warranty, first contact our customer service team using the email address on the back of this book. If Customer Service asks you to return you product to us, please complete the following details and include this form in the package.
- Page 28 REPAIR HISTORY Problems Description Reason for Problems Repair Description First Repair Date of Repair: Repaired by: Problems Description Reason for Problems Repair Description Second Repair Date of Repair: Repaired by: Only to be completed by UbiBot technicians...