Advertisement
INDIGO COMBO T5
INSTALLATION INSTRUCTIONS
EXPOSED T-BAR
Step 1
Lift the luminaire into the ceiling cavity.
Step 2
Complete the electrical connection.
Step 3
Position the luminaire centrally within
the T-Bar.
CODE INS-IND5
SYDNEY | Unit 4, 21 Mars Road. Lane Cove. NSW 2066 P.02 9420 5799 F.02 9420 5988
PLASTER CEILING
Step 1
Cut out the correct hole size in the
ceiling for your plaster frame accessory.
Step 2
Lift the plaster frame to the plaster
cut out.
Step 3
Fold over the retaining tabs located
in the ends of the frame to assist in
securing the frame.
Step 4
Fasten the recessing brackets to the
secure the frame within the ceiling cavity.
Step 5
Lift the luminaire into the ceiling cavity.
Step 6
Complete the electrical connection.
Step 7
Position the luminaire centrally within
the Plaster frame.
MELBOURNE | 17-19 Jets Court. Melbourne Airport. VIC 3045 P.03 9344 7444 F.03 9344 7433
SURFACE MOUNTED
Step 1
Lift the surface mounted body to
the ceiling, feeding the supply cable
through the cable entry hole.
Step 2
Secure the body onto the mounting
surface with appropriate fasteners (not
supplied) to suit the mounting substrate.
Step 3
Complete electrical connection.
Step 4
Slide the luminaire into the surface
mounted body and connect the earth
lanyard to the end.
Step 5
Slide the end into the surface mounted
body.
BRISBANE | 53 Caswell Street. East Brisbane. QLD 4169 P.07 3891 0744 F.07 3891 0755
Advertisement
