Table of Contents
Advertisement
Quick Links
110V LED NON-CORROSIVE HEADS
FOR TRIPOD BASE
FOR MODEL: LFS220, LFS220E, LFS525 & LFS525E
INTRODUCTION
The 110V LED Tripod Head
is designed to fit onto the
Collapsible Tripod Base (sold
separately). The LED Head comes in
20W and 25W and comes complete with a
16A 110V plug and 2 x 110V sockets to add
additional light fittings or power tools.
SPECIFICATION
110V
LED
• Dimensions:
20W: L: 620 x W: 105 x D: 200mm
25W: L: 1500 x W: 105 x D: 160mm
• LED: 96pcs/168pcs of 0.2W 2835
• Working Temperature: -10°C - 40°C (0°C - 40°C for emergency
version)
BOX CONTENTS
• 110V LED Non-Corrosive Head
SAFETY WARNING
• The installation should be carried out by a qualified electrician in compliance with the current edition
of the IEE Wiring Regulations.
• Prior to installation carry out the necessary risk assessment considering the people who could be at
risk, the level of risk and the precautions required to control the risk.
• Ensure that the circuit supply is isolated either by the circuit supply fuse being removed or the
applicable circuit breaker being turned off before installation or any maintenance.
• Check the total load on the circuit including the luminaire does not exceed the rating of the circuit
cable, fuse or circuit breaker.
• If the fitting incorporates control gear, ensure careful sizing to avoid instances of nuisance tripping of
the protective device used in the installation.
•
Follow the provided installation instructions, using the fixings supplied or recommended.
Red Arrow Trading
Elsworth House, Herries Road South
Sheffield, S6 1QS
1800lm/
80 Ra
4000K
2200lm
T: 0800 195 0006 F: 0870 195 0006
E: sales@redarrowtrading.com
www.redarrowtrading.com
20W/
IP65
50Hz
25W
Advertisement
Table of Contents
Summary of Contents for Red Arrow Trading 110V LED NON-CORROSIVE HEADS
- Page 1 110V LED NON-CORROSIVE HEADS FOR TRIPOD BASE FOR MODEL: LFS220, LFS220E, LFS525 & LFS525E INTRODUCTION The 110V LED Tripod Head is designed to fit onto the Collapsible Tripod Base (sold separately). The LED Head comes in 20W and 25W and comes complete with a 16A 110V plug and 2 x 110V sockets to add additional light fittings or power tools.
- Page 2 110V LED NON-CORROSIVE HEADS FOR TRIPOD BASE FOR MODEL: LFS220, LFS220E, LFS525 & LFS525E INSTALLATION INSTRUCTIONS 1. Remove the 110V LED Non-Corrosive Head from the box, straighten the adapter that is attached to the back and slide into the opening at the top of the LED Tripod Base (sold separately).
- Page 3 110V LED NON-CORROSIVE HEADS FOR TRIPOD BASE FOR MODEL: LFS220, LFS220E, LFS525 & LFS525E TESTING Product Type: ........Product Location: ........ MONTH TEST FIRST SECOND THIRD FOURTH FIFTH YEAR YEAR YEAR YEAR YEAR Signed Date Signed Date Signed Date Signed...
-
Page 4: Additional Information
110V LED NON-CORROSIVE HEADS FOR TRIPOD BASE FOR MODEL: LFS220, LFS220E, LFS525 & LFS525E MAINTENANCE • Clean with a soft dry cloth, do not use any aggressive cleaning products or solvents which may damage the fitting. • When this fitting comes to the end of it’s life or you choose to replace it, please do not dispose of it with your normal household waste.
Need help?
Do you have a question about the 110V LED NON-CORROSIVE HEADS and is the answer not in the manual?
Questions and answers