Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Briteq LDP COLORSTRIP 12FC
-
Page 3: Before Use
ENGLISH USER MANUAL OPERATION MANUAL ® Thank you for buying this Briteq product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES • Powerful indoor LED projector equipped for typical “wall wash” applications. -
Page 4: Safety Instructions
• Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. BRITEQ 2/13 LDP-COLORSTRIP 12FC/24FC ®... - Page 5 7. SAFETY HOLE: used to attach a safety cable when the unit is rigged, see paragraph “overhead rigging”. 8. BARN DOOR fixing holes: used to fix the included barndoor. The barn door hides the LEDs and thus reduces unwanted glare. BRITEQ 3/13 LDP-COLORSTRIP 12FC/24FC...
-
Page 6: Overhead Rigging
• 20CH (4xRGBW+D) The 4 colors + master dimmer can be set separately on 4 sections. • Once the correct option shows on the display, press the [ENTER] button to save it. Remark: on RDM-compatible controllers this option can also be remotely set. BRITEQ 4/13 LDP-COLORSTRIP 12FC/24FC... - Page 7 ENGLISH USER MANUAL BRITEQ 5/13 LDP-COLORSTRIP 12FC/24FC ®...
-
Page 8: Slave Mode
• Once you have the desired level, press the [ENTER] button to save it. Note: the setting of this option has NO effect while the projector is used as SLAVE or in DMX-mode. BRITEQ 6/13 LDP-COLORSTRIP 12FC/24FC... -
Page 9: [Locking] Mode
DMX-signal is kept on the projector. • Once the correct option shows on the display, press the [ENTER] button to save it. Note: as soon as the input detects a DMX-signal, blackout or freeze mode will be cancelled. BRITEQ 7/13 LDP-COLORSTRIP 12FC/24FC... -
Page 10: Default Settings
• Press the [MENU] button until the [FIRMWARE] is showing on the display. Note: The firmware of this unit can be upgraded using our special “Firmware Updater 2” (separately available from Briteq). More information about this can be found in the user manual of the firmware updater or our website: https://briteq-lighting.com/firmware-updater-2... - Page 11 • Make sure that all units are connected to the mains. • Each unit in the chain needs to have its proper starting address so it knows which commands from the controller it has to decode. BRITEQ 9/13 LDP-COLORSTRIP 12FC/24FC...
-
Page 12: Dmx Charts
Available on both LDP-COLORSTRIP 12FC and LDP-COLORSTRIP 24FC Channel: Value: Function: Remarks 000-255 Red (0-100%) 000-255 Green (0-100%) 000-255 Blue (0-100%) 000-255 White (0-100%) 000-255 Master dimmer (0-100%) 000-004 ON (no strobe) Increasing speed: 005=slow ~ 255=fast 005-255 Strobe BRITEQ 10/13 LDP-COLORSTRIP 12FC/24FC ®... - Page 13 Master for section 1 000-255 Section 1 Master (0-100%) 000-255 Section 2 Red (0-100%) 000-255 Section 2 Green (0-100%) 000-255 Section 2 Blue (0-100%) 000-255 Section 2 White (0-100%) Master for section 2 000-255 Section 2 Master (0-100%) BRITEQ 11/13 LDP-COLORSTRIP 12FC/24FC ®...
-
Page 14: Maintenance
• The DMX-controller asks each RDM device for some basic data so it knows which devices are connected. The projector will respond: • Device name: the actual name of the unit • Manufacturer: Briteq ® • Category: LED Dimmer • Firmware: x.x.x.x (firmware version of the projector) •... -
Page 15: Specifications
All dimensions are valid for both projectors, except 2 lengths: dimensions for 24FC are between brackets. The information might be modified without prior notice You can download the latest version of this user manual on our website: www.briteq-lighting.com BRITEQ 13/13 LDP-COLORSTRIP 12FC/24FC ®...