Summary of Contents for BONKOTE MCA-900II
- Page 1 MCA-９００Ⅱ Digital Thermometer Instruction manual Preparation in May 2018 The 2 edition JAPAN BONKOTE CO., LTD.
-
Page 2: Table Of Contents
Contents 1. Preface・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・2 2. Notes for safety・ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・2 3. Specification・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3 (A) Name and Function (B) General Specification (C) Display 4. How to use ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・4 (A)-1 Ｉron tip sensor unit (SAT-1) (A)-2 Replacement sensor (SC-006) (A)-3 How to measure iron tip temperature Dip sensor (SC-007) Surface sensor (SC-008) 5. -
Page 3: Preface・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・2
1. Preface Thank you very much for purchasing Digital thermometer MCA-900II. For using this machine properly, please read through this instruction manual before use. Also, keep this instruction manual after read. 2. Notes for safety Notes for safety should be followed completely for using this machine safely... -
Page 4: Specification・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3
3. Specification (A) Name and Function ① Display ② POWER button ON/OFF ① ③ HOLD button ② ⑤ Holding measured value ③ ④ MAX button ④ Holding highest measured value ⑥ ⑤ 0.1°/1° button Selecting a display resolution ⑥ Soft case (B) General specification Resolution 0.1°C (0 ~ 199.9°C) / 1°C (whole measurement range) -
Page 5: How To Use ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・4
4. How to use (A)-1 Iron tip sensor unit (SAT-1) ① Connect the iron tip sensor unit (SAT-1) to MCA-900Ⅱafter confirmation of the polarity. ② Turn on the power switch. Approximate the room temperature will be indicated at the display of MCA-900Ⅱ. ③... - Page 6 (B) Dipping sensor (SC-007) ※ Measurement range Room temperature ~ + 800°C ① Connect the dipping sensor to MCA-900Ⅱ after confirming the polarity. ② Turn on the power switch. Approximate the room temperature will be indicated at the display of MCA-900Ⅱ. ③...
-
Page 7: (A) Data Hold Function
5. Functions (A) Data hold function ① Push『HOLD』key, is turned on and indicated value is hold. ② Push『HOLD』key again, is turned off and release the function. (B) MAX hold function ① Push『MAX』 key, is turned on and highest measured value is indicated and hold. -
Page 8: Replacement Of Battery ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・7
When you think your system does not work properly, read this manual again to check. If still troubles are not solved, please contact your dealer or us. JAPAN BONKOTE CO., LTD. 600-14 Kasahara, Mito, Ibaraki, 310-0852 JAPAN ＴＥＬ +81 ２９－２４１－２７２５ ＦＡＸ +81 ２９－２４１－２７２６...
Need help?
Do you have a question about the MCA-900II and is the answer not in the manual?
Questions and answers