SkylinkHome PR-318 Preliminary Manual

TM
SkylinkHome Plug-In Lighting Module
1. Introduction
Thank you for your purchase of a SkylinkHome
allows you to wirelessly turn on or off, dim and brighten the lighting fixtures.
The Plug-In Lighting Module PR-318 can communicate with up to 16 transmitters so users has the option
to add more transmitters to the system.
The following items are included in this package:
- One Plug-In Lighting Module
User's Instructions
-
2. Installation
Simply plug the Plug-In Lighting Module to an electrical outlet, then plug in a lighting fixture to the socket
on the Plug-In Lighting Module.
The Plug-In Lighting Module is designed to operate maximum load of 300W at 120VAC, 60Hz.
3. Programming the Plug-In Lighting Module
- Plug in a load to the Plug-In Lighting
Module.
- Plug in the module to an AC outlet, the
red LED flashes once quickly. The
connected load (i.e. lighting fixture) will
be on automatically.
Press and hold the 'SET' button for about
-
3 seconds until the red LED flashes.
Release the 'SET' button.
- Activate the transmitter you are
programming to the Plug-In Module.
Once the transmitter is programmed, the
red LED stop flashing. You have
successfully program the transmitter.
Model: PR-318
TM
Plug-In Lighting Module, Model PR-318. This receiver
Preliminary Manual