MASS FIDELITY Sub Quick Start Manual

PAIRING YOUR SUB WITH THE CORE

Thank you for purchasing Mass Fidelity's Wireless Subwoofer for
the Core system. Follow these simple instructions to immediately
start using your Sub.
1. Connect the power supply cable to the Sub's input jack and plug
the power adapter into a wall outlet.
2. Pair the Sub with a Core speaker, so they can be remembered
as a pair on the network:
On your Core speaker: Press and hold the POWER
and VOLUME "+" keys for 5 seconds.
The top LED will flash green, once, confirming pairing with
your Sub.
Your Core speaker will now always remember the Sub it is
paired with, even after powering off.
3. To unpair the Sub from your Core speaker, press and hold
the POWER and VOLUME "-" keys for 5 seconds.

WIRED CONNECTION

The Core Sub can also accept wired a 3.5 mm wired signal. When
the Sub detects a wired signal it will automatically switch off all
wireless functionalities. Once the Sub is wired, its LED indicator will
turn to white (line-in).
For further sound tuning and detailed information see the complete
instruction manual available on our website:
www.massfidelity.com/support
Quick Start Guide
ENGLISH