Specifications - Onkyo TX-8220 Instruction Manual

TX-8220
Stereo Receiver
Bluetooth
® Transforms Mobile Audio
Into Room-filling Sound
With low-latency Bluetooth 4.1 wireless technology, you can
stream almost any audio that's playing on your smartphone,
tablet, laptop, or PC applications. Auto Connect function
makes pairing up and playing back your music much faster and
easier than before, with enhanced stability reducing loss in
audio quality.
Connects Your Turntable, CD Player, TV, and
Media Streamer
Aimed at music and film lovers that want to add great sound
to a variety of media sources, the TX-8220 comes extensively
equipped with audio connections. The receiver is one of the
few at this price to include a quality MM phono stage for your
turntable. It also has digital inputs to route audio from
TV through amp and speakers. Four analog line inputs are
included should you prefer your source device to handle
D/A conversion, or for connecting a phone or DAP.
Rich and Powerful Hi-fi Sound
Pair the TX-8220 with your choice of loudspeakers and add
high-fidelity sound to everyday entertainment, from streaming
audio to TV programs, vinyl, and CD. Discrete amplifiers,
massive EI transformer, and customized capacitors deliver
ample driving power with low distortion. High current grips
the speaker cones for more accurate control, restoring vitality
and detail to music. Non-phase-shift circuitry, meanwhile,
clearly focuses the audio image.
Due to a policy of continuous product improvement, Onkyo reserves the right to change specifications and appearance without notice. The Bluetooth
All other trademarks and registered trademarks are the property of their respective holders.
High Current and Low Impedance Architecture
Dynamic passages in music and film soundtracks can see
impedance spike and dip dramatically for short periods. This
can place up to 10 times the usual load on your amplifier, and
if it can't meet power demands, sound quality suffers. Onkyo's
high-current low-impedance WRAT design uses a massive
EI transformer to drive your speakers accurately, even under
heavy loads.
FM/AM Tuner with 40 Memory Presets
Scan, name, and save 40 FM and AM radio stations for easy
one-touch recall anytime. Bring a huge variety of programming
to your listening space, from news and sport to music and
talk radio.
A/B Speaker Posts for Multi-room Audio
TX-8220 features two sets of speaker posts enabling
connection of two pairs of speakers. The receiver is designed
to drive either a single pair of speakers rated at 4–16 Ohms,
or two pairs of 8–16 Ohms speakers, allowing you to enjoy
the same audio source in two rooms at once, or to easily
switch between two sets of speakers.
Bass, Treble, and Balance Controls
Bass, treble, and balance buttons are useful for adjusting the
tone characteristics of your music for satisfying response with
any speaker type. Carefully designed tone circuits—which
some receivers don't include—let you personalize sound to
taste with no perceived loss in audio quality.
http://www.onkyo.com/

SPECIFICATIONS

Amplifier Section
Power Output
Dynamic Power
THD+N (Total Harmonic Distortion + Noise)
Input Sensitivity and Impedance
Rated RCA Output Level and Impedance
Phono Overload
Frequency Response
Tone Control
Signal-to-Noise Ratio
Speaker Impedance
Headphone Output Impedance
Headphone Rated Output 60 mW (32 Ohms, 1 kHz, 10%)
Tuner Section
Tuning Frequency Range
FM
AM
FM/AM Preset Memory
General
Power Supply
Standby Power Consumption
No-Sound Power Consumption
Dimensions (W x H x D) 17
Weight
UPC CODE
(B)
CARTON
Dimensions (W x H x D) 21˝ x 9
Weight
Supplied Accessories
• Indoor FM antenna • AM loop antenna • Instruction manual
• Remote controller • AAA (R03) batteries x 2
Text on receiver may vary with region.
® word mark and logos are owned by the Bluetooth SIG, Inc. WRAT is a trademark of Onkyo Corporation.
Copyright © 2017 Onkyo Corporation. All rights reserved.
45 W/Ch (8 Ohms, 20 Hz–20 kHz, 0.08%,
2 Channels Driven, FTC)
100 W/Ch (6 Ohms, 1 kHz, 10% THD,
2 Channels Driven)
140 W (3 Ohms, Front)
120 W (4 Ohms, Front)
80 W (8 Ohms, Front)
0.08% (20 Hz–20 kHz, Half Power)
Line 450 mV/40 k-ohms
Phono MM 10 mV/50 k-ohms (IHF-A)
420 mV/2.2 k-ohms (Line-Out)
2.8 mV/3.3 k-ohms (Subwoofer Pre-Out)
40 mV (MM, 1 kHz, 0.5%)
10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
±12 dB, 100 Hz (Bass)
±12 dB, 10 kHz (Treble)
100 dB (IHF-A, Line In, Speaker Out)
93 dB (IHF-A, Phono In, Speaker Out)
4 Ohms–16 Ohms (A or B)
8 Ohms–16 Ohms (A + B)
390 Ohms
87.5 MHz–107.9 MHz
530 kHz–1,710 kHz
40 Stations
AC 120 V, 60 Hz
0.4 W
20 W
1 / ˝ x 5 7 / ˝ x 12 15 / ˝
8 8 16
(435 x 149 x 328 mm)
15.0 lbs. (6.8 kg)
889951001096
3 / ˝ x 15 13 / ˝
16 16
(533 x 234 x 401 mm)
19.0 lbs. (8.6 kg)