Advertisement
Quick Links
Advertisement
Summary of Contents for Teletechno Vista WIFI
- Page 1 Quick Installation Guide...
- Page 2 Instructions The installation of VISTA WIFI cameras is based on 3 different phases, with which we will be able to obtain a good monitoring experience: Phase Phase Phase Installing the APP Using the APP Physical installation and configuración the camera.
-
Page 3: Front View
Knowing The Camera Front view Rear View Microphone Allows the camera to capture nearby sounds and send them with the video. They detect the amount of incoming light and turn on the IR LEDS for night vision when necessary. Light detectors The alarms and audio will be heard here. -
Page 4: Physical Installation
- Camera - Electrical connection Cable. - Reset PIN accesorie. MODEL: VISTA WIFI DEVICE ID: XXXXXXXXXX www.teletechnonet.com Serial Number... - Page 5 Finally you must wait for the camera to turn As an option the user can insert a "MicroSD" on its LED lights intermittently, when red memory card. The camera is compatible with and green light is observed it is when the a memory of up to 32 GB, so you can insert camera is to be set up.
- Page 6 Installing The APP Phase and Logging GOOGLE PLAY Go to APP STORE Go to Search“VISTA WIFI” Search “VISTA WIFI” Install the APP Install the APP Google Play VISTA WIFI VISTA WIFI App Store...
- Page 7 Registration (account creation): Click on "Register" (Fig. 1).- Enter a valid email address (fig. 2). -click "Next" (Fig. 2). Note: email support up to 31 characters...
- Page 8 Enter the password you want to enter the application (Fig. 3). Click on "Get Code" (Fig. 3). Enter the code that was sent to your email. (Fig. 3). If the Verification message does not arrive, click "Get Code" Click on "Start VISTA WIFI" (Fig. 4).
- Page 9 Add new device by WiFi: -Click on "Add New Device" (Fig. 5) . -Click on "Wireless configuration (Fig. 6). -Wifi conection with camera" (Fig. 7)
- Page 10 -Click on "Next Step" (Fig. 8). -Click on "WiFi Configuration", to set -Enter the SSID and password of the Wifi network the WiFi view (Fig. 9). to which you want to add your camera (Fig. 9). Click Next, after listening, it has configured "Note: This camera do not support 5Ghz wireless lan"...
- Page 11 Phase Monitoring Watch video: The camera has been successfully added, click on your camera to view the video in real time (Fig. 10 and 11).
-
Page 12: Configure Date/Time
Configure Date/Time: Click "Settings" (Inside Camera monitoring) (Fig. 12). Select the "Time" option (Fig. 13). Select Time Zone (UTC) Select the time zone according to your country (countries in Central America select UTC-6), (Fig. 14). Or you can select time setting to Configure the time and date manually. Use the arrow at the top left to return to the main menu, (Fig-14) - Page 13 Configure Admin Password: Enter "Configuration" (Inside Camera monitoring) (Fig. 15). Select the "System" option (Fig. 16).
- Page 14 -Select "Change the Administrator password" (Fig. 17). -Enter the new "password" of 0-18 characters (Fig. 18) Click "Save". If you want to re-configure the camera, click on the "RESET" button for 15 seconds and follow the above steps described above.
- Page 15 Mobile application-Horizontal view options (Android) IOS Recording To make recordings on iOS, disable Icloud > images ( ) On your device iphone & ipad, Then click on the Register button . To record with audio, click Audio button. Note: IOS and Android vertical view is different from the top image but with the same options To record videos on the iOS device you need to click on the respective button.
- Page 16 VISTA WIFI (for low speeds select "Fluent"). Extends the monitoring screen in full mode or collapses the screen...
- Page 17 Support For support you can send an email to soporte@teletechnonet.com Or you can contact our call center support team in each country: Guatemala: +502 2218 9444 El Salvador: +503 2113 0231 Honduras: +504 2280 2183 Nicaragua: +505 2252 4369 Costa Rica: +506 4001 6716 Usa &...
Need help?
Do you have a question about the Vista WIFI and is the answer not in the manual?
Questions and answers