Transferring Measurements Via Bluetooth - Silvercrest 290989 Instructions For Use And Safety

After removing your finger from the pulse oximeter, the device will automatically
switch off after approx. 10 seconds.

transferring measurements via Bluetooth

Note: Bluetooth turns on automatically.
®
The „HealthForYou" app must be activated for transfer.
The time and date will be synchronised with the smartphone during every data transfer.
To synchronise measurements with your smartphone via Bluetooth
Activate Bluetooth
Hold the function button
will flash „SYNC".
1
The device will attempt to connect to the app for 10 seconds.
Once connected, „SYNC" will stop flashing.
The stored measurements will automatically be transferred to the app. The pulse
oximeter will then automatically switch off.
26 GB/IE/NI
in your smartphone settings and open the „HealthForYou" app.
®
for 5 seconds with the device switched off. The display
2
®
:
®