Chapter 1: Overview ....................4 Physical Outlook ....................4 Chapter 2 : System Requirement and Installation ........... 8 Connecting the SmartRouter IAD ..............8 Setting up TCP / IPv4 ..................10 For Windows 7 ..................10 Renewing IP Address on Client PC..............13 ...
Before You Use Thank you for choosing the SmartRouter IAD WHD0110(RoHS) is dual-core dual system with super memory about 1G RAM + 4G eMMC and built-in removable hard disk up to 1TB. It supports gigabit WiFi with 802.11ac double frequency (2.4GHz/5GHz). It can be used as Router and HD player at same time.
LEDs and connectors on the front and rear surface of the router. Before you use/install this SmartRouter IAD, please take a look at the information first. Physical Outlook ① SD Card Slot Compatible with SD3.0, MMC ver4.41 ② Hot Key for copy file from SD Card to HDD...
Page 5
SmartRouter IAD User Manual ① Push button for WPS ② Push Switch for Power On ③ Ports RJ45 10/100 for LAN Ethernet ④ Port RJ45 10/100 for WAN Ethernet ⑤ HDMI Port Support HDMI1.4 3D feature 1080P/720P ⑥ Earphone Jack ⑦...
Page 6
SmartRouter IAD User Manual ① SATA2.5"HDDSwapable Slot with default 1TB HDD ① Home button ② Direction button ③ OK button...
Page 7
SmartRouter IAD User Manual ④ Back button ⑤ Menu button ⑥ Favorites button ⑦ Play/Pause button ⑧ Vol up button ⑨ Vol down button...
SmartRouter IAD User Manual Chapter 2 : System Requirement and Installation Connecting the SmartRouter IAD Please follow the steps below to connect the related devices.
SmartRouter IAD User Manual Setting up TCP / IPv4 In the following illustrations, we will set the PC to get an IP address automatically at the same time. For Windows 7 Open the Start menu, point to Control Panel and click it.
Page 11
SmartRouter IAD User Manual Click Local Area Connection and then click Properties.
Page 12
SmartRouter IAD User Manual When it returns to the General Tab on the Local Area Connection Properties window, highlight Internet Protocol (TCP/IPv4) and then click Properties. Under the General tab, select Obtain an IP address automatically, and Obtain DNS server address automatically. Then click Ok.
SmartRouter IAD User Manual Renewing IP Address on Client PC After the SmartRouter IAD gets on line, there is a chance that your PC does not renew its IP address and thus causes the PC not able to access the Internet.
Page 14
SmartRouter IAD User Manual Type cmd in the text box that appears and click OK. Then you will see the command prompt window. Type ipconfig at the command prompt window and press Enter to view the computer’s IP information from DHCP server.
Page 15
SmartRouter IAD User Manual If the computer is holding a current IP address, type ipconfig /release to let go of the address, then type ipconfig /renew to obtain a new one.
SmartRouter IAD User Manual Brief introduction of UI on TV In the following illustrations, we will know the function on the User interface. ①Date & time and location: Can show current location and date & time ②Weather: Can show current weather condition, humidity and light intensity (based on the information from the Internet) ③Setting: Can set up SmartRouter...
Page 18
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the SmartRouter IAD and is the answer not in the manual?
Questions and answers