Advertisement
Quick Links
User's Manual
PoH/PoE Power Injector
Power-over-HDBaseT (PoH) Voltage Inserter, 30 Watt
Complies with PoH Standard as defined for
Provides PoE for 10, 100, and 1000BaseT network applications
UMA1281 Rev NC
© Copyright 2019. Hall Research, Inc. All rights reserved.
1163 Warner Ave Tustin, CA 92780, Ph: (714)641-6607, Fax (714)641-6698
Advertisement
Summary of Contents for Hall Research Technologies 511-POH-30W
- Page 1 User’s Manual PoH/PoE Power Injector Power-over-HDBaseT (PoH) Voltage Inserter, 30 Watt Complies with PoH Standard as defined for Provides PoE for 10, 100, and 1000BaseT network applications UMA1281 Rev NC © Copyright 2019. Hall Research, Inc. All rights reserved. 1163 Warner Ave Tustin, CA 92780, Ph: (714)641-6607, Fax (714)641-6698...
- Page 2 PoH Power Inserter TRADEMARKS USED IN THIS MANUAL Hall Research and its logo are trademarks of Hall Research. Any other trademarks mentioned in this manual are acknowledged as the property of the trademark owners. FCC RADIO FREQUENCY INTERFERENCE STATEMENT This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication.
- Page 3 511-POH-30W Model 511-POH-30W PoH Power Inserter The 511-POH-30W is a PoH power inserter that can be used to power one end of an HDBaseT link. It passes the RJ45 data across and at the same time injects 48v power for the PD (powered device). The supply complies with the IEEE 802.3af and will only apply power to the cable only if a compliant...
- Page 4 PoH Power Inserter Specifications Power Total Power 33 W (max power consumption at full load) PoE Power 30 W AC Input Voltage 100~230 VAC Output voltage 48~52 VDC Signal Compatibility PoE Standard IEEE 802.3af (supports 10/100/1000Mbps data rates) HDBaseT PoH for HDBaseT 1.0 Class A, B and 2.0 RJ45 Power end-span: 1/2,3/6 spare line pair (default);...