Advertisement
STEP 1: CHARGE YOUR KID POWER BAND
1. Connect the Band to the charger
Align the prongs on the rectangular end of the USB adapter with the
holes in the back side of the Kid Power Band. It will snap into place.
2. Plug into USB
Insert the USB plug into a USB port. (USB ports are commonly found in
computers and TVs. You can also use a USB power adapter to
connect the Band directly to an electrical socket.)
3. Success
Once successfully charging the band will flash "UNICEF KID POWER"
and then show a battery charging symbol.
4. Troubleshooting
Make sure that the band is attached so that through the two holes on
the bottom you see silver and not black. Also make sure that the
prongs have gone into the holes to touch the silver dots on the back of
the tracker.
Advertisement
