Advertisement
Quick Links
THE BOSS
AIR MICRO ROTARY
THE POWER TO ACHIEVE PERFECTION
User's Manual and Care Instructions
THE BOSS AIR Micro Rotary Polisher
Please carefully read, understand, and follow all safety information in this manual prior
to and during use of this tool. Keep these instructions handy for future reference.
Advertisement
Related Manuals for Griots Garage THE BOSS
Summary of Contents for Griots Garage THE BOSS
- Page 1 THE POWER TO ACHIEVE PERFECTION User’s Manual and Care Instructions THE BOSS AIR Micro Rotary Polisher Please carefully read, understand, and follow all safety information in this manual prior to and during use of this tool. Keep these instructions handy for future reference.
-
Page 2: Important Safety Information
Keep these instructions handy for future reference. INTENDED USE The Griot’s Garage THE BOSS AIR Micro Rotary Polisher is designed to be used as a polisher. It is designed to be used with Griot’s Garage backing plates, appropriate Griot’s Garage Best... - Page 3 Failure to follow the warnings and instructions may result in serious injury. The term “power tool” in the warnings refers to your Griot’s Garage THE BOSS AIR Micro Rotary Polisher. Retain these ™...
- Page 4 by Griot’s Garage. Just because the accessory can be attached to the power tool does not assure safe operation. c) Do not use damaged buffing pads and accessories on power tool. Compromised accessories can fail and cause injury. d) Disconnect the power tool from air source before making any adjustments, changing accessories, or storing the power tool.
- Page 5 Disconnect air line from buffer. Warning: An inadequately tightened backing plate could cause the threaded Warning: spindle to break causing damage to the tool and work-piece and possible injury to the operator or bystanders. 6. Power Tool Specifications Type Air Micro Rotary Polisher Motion Rotary –...
-
Page 6: Maintenance
Maintenance Always disconnect tool from air supply prior to maintenance. Caution: a) Before using Griot’s Garage THE BOSS AIR Micro Rotary Polisher, it is ™ recommended to add four to five drops of air tool oil into the air inlet opening and 1 - 2 drops following every 3 - 4 hours of use. - Page 7 Allow to dwell for 10 minutes, then rinse thoroughly. Allow to air dry and store in cool, dry place. Q: What backing plate size is compatible with THE BOSS AIR Micro Rotary Polisher? A: The tool comes with both a 2” and 3” Rotary Backing Plate. The 3” is more appropriate for sail panels, bumpers, mirrors, etc.
- Page 8 9. THE BOSS AIR Micro Rotary Polisher Accessories ™ 3” BOSS Pads BMF3 BOSS 3” Microfiber Pads B110F3 BOSS 3” FAST Correcting Foam Pads B120F3 BOSS 3” Correcting Foam Pads B130F3 BOSS 3” Perfecting Foam Pads BR3BP 3” BOSS AIR B140F3 BOSS 3”...