Introduction Since Formaldehyde and TVOCs are highly toxic and carcinogenic to human which necessitates monitoring of gas leakage or concentration to ensure safety as well as our well-being, especially in places like houses just finishes construction, storehouse and etc. This Gas Detector can be utilized for verifying concentration of Formaldehyde and TVOCs within a few minutes.
Page 3
Model Number GA0030 Detects Formaldehyde, TVOCs Detection Technology Semi-conductor Sensor Technology Detection Range 0~9.999 mg/m Resolution 0.001 mg/m Safety Precaution And Consideration Do not drop the device. Do not let the device get wet. Ensure batteries are correctly installed.
Operation Calibration (only for the first time use): 1. Press and hold the On/Off button for a few seconds. 2. Device will start up. 3. The screen will display 120-second countdown. 4. Keep the product in outdoor fresh air for 120 seconds. 5.
Page 6
FAQS 1. Why does the detector have a very high power consumption? ANS: A lot of complicated operations is carried out by the device during the process to guarantee the detection accuracy and sensitivity,and thus large power consumption is necessary. Please turn off the product to prevent waste of electricity when detection ends.