Subscribe to Our Youtube Channel
Summary of Contents for DRC Techno J.SECURE +
- Page 1 DRC TECHNO J.SECURE + USER MANUAL v 2.0 CONFIDENTIAL This information is the property of DRC Techno. Any reproduction, publication or distribution to a third party is strictly Forbidden...
-
Page 2: Table Of Contents
P a g e Table of Contents SAFETY FIRST ............................2 SYSTEM REQUIREMENT& SPECIFICATION ....................3 PURPOSE ..............................4 USP ................................4 ACCESSORY CHECKLIST ........................... 5 GET STARTED ............................7 INSTALLATION GUIDE ..........................8 CALIBRATION............................9 PROCESS FLOW AND OPERATION MANUAL ..................10 TROUBLESHOOT ............................ -
Page 3: Safety First
P a g e SAFETY FIRST DRC Techno believes that safety of personnel working on and around system is important and recommend all to read safety information below and in the Operations and Maintenance Manual before attempting to operate the system or perform any other process. -
Page 4: System Requirement& Specification
P a g e SYSTEM REQUIREMENT& SPECIFICATION Size Weight J.Secure Plus 470X470X594 58 kgs Power Supply Input voltage range : 100-240 V AC Input Current :<= 6A AC frequency range : 50-60 Hz Typical response time :< = 5 s ... -
Page 5: Purpose
P a g e PURPOSE J-Secure identifies lab grown synthetic diamonds and perform effectively with practically all sizes and shapes of loose diamonds as well as studded jewellery. Instrument is not a TYPEs separator but it directly detects lab grown synthetics, grown by CVD/HPHT methods. -
Page 6: Accessory Checklist
P a g e ACCESSORY CHECKLIST... - Page 7 P a g e 8. Wireless Keyboard and mouse 9. Software Key 10. Wi-Fi Antenna 11. Power Cable 12. Ethernet Cable 13. Fluorescent Light 14. Necklace/Ring Mount Tray 15. Bangles Mount Rotary 16. Loose Diamond Mount Tray...
-
Page 8: Get Started
P a g e GET STARTED A Quick Look Fig. 1 Image shown is for basic information only 1. LCD(Touch Screen) On/Off 2. Power On/Off 3. Wireless keyboard/mouse connector 4. Software Key 5. Wi-Fi Antenna 6. Power Cable Socket 7. Ethernet port 8. -
Page 9: Installation Guide
P a g e INSTALLATION GUIDE 1. Place the machine on a table in such a position that the eye level of user operating the machine is parallel to the height of the Touch screen LCD. 2. Connect the power cable to the machine, please make sure the switch is off before the power cable is connected to the machine so as to avoid any problem 3. -
Page 10: Calibration
P a g e CALIBRATION J.Secure + is programmed to automatically calibrate at runtime of the scan process but to check the proper running of entire system we strongly advise to check the sample pendant that is provided with the machine every time the software is started or is initialized in the beginning Method to check the sample pendant 1. -
Page 11: Process Flow And Operation Manual
P a g e | 10 PROCESS FLOW AND OPERATION MANUAL 1. Switch on the “ Instrument” and “Touch Screen LCD” 2. Check the jewellery /diamond tray to see if it is properly locked and then close the door 3. Start the S/W and wait until the machine gets initialized. - Page 12 P a g e | 11 4. Press Home Button in the s/w to bring the tray to centre position 5. Press to eject the tray and pull it out gently to mount jewellery /diamond 6. Wear gloves while mounting jewellery so as to keep it free from masking , coating ,greasy or dusty surface 7.
- Page 13 P a g e | 12...
- Page 14 P a g e | 13...
- Page 15 P a g e | 14...
- Page 16 P a g e | 15 Scan Process: Case 1: Auto This process is used when the entire plate has to be scanned to detect synthetic diamonds present in the mounted jewelleries Case 2:Manual a. Preview and scan...
- Page 17 P a g e | 16...
- Page 18 P a g e | 17 This process b. Position, Focus and scan...
- Page 19 P a g e | 18 c. Direct Scan...
-
Page 20: Troubleshoot
P a g e | 19 TROUBLESHOOT 1. It's not working. Plug in right power supply as specified in operation manual. Switch on the “Instrument” and “Touch Screen LCD” Check the jewellery /diamond tray to see if it is properly locked and then close the door ... -
Page 21: Software Error Messages
P a g e | 20 SOFTWARE ERROR MESSAGES Sr.No MESSAGE Probable Reason Remove Bangle Attachment/Change Prop Selection This message is shown when the bangle Scan Attachment is connected and Necklace/Ring setting is chosen for scan process Add Bangle Attachment/Change Prop Selection This message is shown when the bangle Scan Attachment is not connected and Bangle... -
Page 22: Faq
P a g e | 21 What is the purpose of J-Secure? The sole purpose of the J-secure is to uphold consumer confidence in the natural diamonds. Most of the diamonds or diamond jewellery purchases are for emotional occasions like wedding, engagement, anniversary or birthday etc. - Page 23 P a g e | 22 The instrument has nearly 3 Inch of diameter area to scan the diamonds. So you can put as much as diamonds on that area of whatever size you wanted to scan. One should make sure that diamond must not be overlapped.
-
Page 24: Warranty
P a g e | 23 WARRANTY Each instrument comes with standard warranty of one year or 2000 Hours of operation whichever is earlier from the date of purchase Warranty will be void if instrument is damaged by mishandling or opened by unauthorized personnel. TERMS AND CONDITIONS By ordering “J-Secure”, a diamond testing device, buyers/users hereby abide and agreed Following Terms and Conditions. - Page 25 3. Any damages, shortages, over deliveries and duplicated orders should be reported to the Seller within 14 days of signed receipt to enable replacement or refund. 4. Delivery is strictly based on First come First Serve bases and sole discretions of DRC Techno.
- Page 26 P a g e | 25 7. RISK Risk in the Goods shall pass to the Buyer upon receipt of the goods. Where the Buyer chooses to collect the Goods itself, risk will pass when the Goods are entrusted to it or set aside for its collection, whichever happens first.
- Page 27 Surat district court. 18. PRIVACY 1. Supplementary PC can only be used with J-Secure and not any other purpose. DRC Techno enjoys right to access the supplementary PC if/when required. Access data may be used for improvement opportunities, such data will be kept confidential by DRC Techno.
- Page 28 User or buyer shall take complete satisfaction tests before placing order. In no case shall DRC Techno, its directors, officers, employees, affiliates, agents, contractors, principals, or licensors be liable for any direct, indirect, incidental, punitive, special, or consequential damages arising from your use of any of the DRC products or services or for any other claim, including, but not limited to.
- Page 29 P a g e | 28 NOTES :...
- Page 30 P a g e | 29 Plot No. 294 - Ground Floor, Beside Dharmanandan Diamond, Behind Patel Faliya, Gotalawadi,Katargam, Surat - 395004 (Gujarat - India) +91 261 2530457 info@drctechno.com www.drctechno.com...
Need help?
Do you have a question about the J.SECURE + and is the answer not in the manual?
Questions and answers