Acer H236HL Service Manual page 7

5
The LCD monitor will contain a main board and a key board which house the flat panel control logic,
brightness control logic and DDC. The adapter will provide AC to DC voltage to drive the main board chips
each voltage. The function key board is used for OSD control, monitor power ON/OFF and the LED indicator
for power status.
LCD Panel
Input
Viewing angle
Display mode
EPA ENERGY STAR®
Power Source
Environmental
Considerations
Peak surge current
Power line surge
All manuals and user guides at all-guides.com
Driving system
Pixel pitch
Contrast Ratio
Response time
Luminance of White
Separate Sync.
H-Frequency
V-Frequency
H:178/ V:178(typ); H:170/ V:170(Min) (CR＞10)
1920 x 1080, 60 Hz
ON Mode
OFF Mode
100 V ~ 240 V, 50  3Hz, 60  3Hz
Operating Temp: 0° to 40°C
Storage Temp: -20° to 60°C
Operating Humidity: 15% to 90%
Storage Humidity: 15% to 90%
Operating Altitude: 12,000 feet
Storage Altitude: 40,000 feet
< 55A peak at 240 VAC and cold starting
No advance effects (no loss of information or defect) with a maximum of 1 half-wave
missing per second
TFT Color LCD
0.0884*RGB(H)mm x 0.2652(V)mm
1000(typ) /700(min)
14ms (Typ.). 28ms(max)
250 cd/m2
H/V TTL
30kHz-83kHz
56-75Hz
< 48W
< 2W