Initial Setup - Bosch GCC30-4 Operating/Safety Instructions Manual

driver or needle nose pliers. Using unsuitable objects can damage the electron-
ics or the gasket.
Initial Set-Up
– Using the battery compartment key 5, turn the battery compartment cover
1 counterclockwise until the tips of the arrows for the "unlocked" symbol are
aligned (Fig. B).
– Remove the protective film 9. To do this, press down lightly at the position shown
in the figure C so that the battery compartment cover 1 cannot drop down.
B
C
D
10
Never remove the battery compartment cover and the
battery with an unsuitable object such as a screw-
1
5
1
9
2
9
5
2