Himax CLT-50 Instruction Manual

All units have an internal circuit breaker protecting the DC output. If the breaker opens, turn
the power off and wait a few minutes to allow the circuit breaker to reset. If the breaker is
continually opening it could mean you have a problem with the tool or the tool power cord,
the power supply or have selected the wrong screwdriver or power supply for the application.
Contact HIMAX for help to resolve the problem.
The AC FUSE on the CLT-50 power supply is located in
the IEC connector on the back of the units along with a spare
fuse. The spare fuse is located in the rear "pocket" of the fuse
holder.
NOTE The CLT-50 has a hard wired cord and can be operated
on 110-115 VAC ONLY. The CLT-50S AC FUSE is inside the
case and is not recommended to be replaced by the user.
SPECIFICATIONS
Features CLT-50
Input voltage
DC 20V/30V — LOW/HI 2 Class converter
Output voltage
Output current DC 2.5A（MAX）
Figure dimension 100(W)×190(D)×95(H)
Weight 2.8Kg
AC power cord length
Application area TL2000(T2)/3000(T3)
TL4000(T4)/5000(T5)
TL6000(T6)/6500(T65)
NINBO TAI-LI A.E.T. CO., LTD
No.168, Yingchun Road, Wangchun Industry Development Area,
Gaoqiao, Yinzhou District, Ningbo, China
Tel︰0574-87368178 Fax︰0574-87368078
www.ehimax.com
CLT-50S
AC 115/ 230V~ 50/60Hz
DC 1.5A —（MAX）
70(W)×125(D)×60(H)
1Kg
1.8m 1.5m
TL2000(T2)/
TL3000(T3)/
TL4000(T4)
HIMAX
ELECTRIC SCREWDRIVER POWER SUPPLY
CLT-50 / CLT-50S
INSTRUCTION MANUAL
CLT-50/CLT-50S power supply can be applied to HIMAX TL/T series or other compatible
electric screwdriver brands, which adopts the advanced electronic circuit, the SMT surface
technology of welding and the branded imported component for control circuit to realize
the supplying of high-quality direct current; The product is characterized by stable
performance, strong power, extreme safety and easy maintenance.
Instruction：
 CLT-50/CLT-50S power supply is applied to TL/T series electric screwdrivers.
 Please notice whether the electric screwdriver connects to the power supply with 5P
connecting wire in correct direction.
 Ascertain that the power supply is connected at 110~230V 50/60Hz, and turn on the power.
When the LED red light illuminates, the machine is ready to work.
 User can change the output voltage to LOW: 25V or HI: 30V by turning the HI/LOW switch,
to convert the speed of the electric screwdriver.
Electric Figure:
Remarks：
F1/Fuse C1/Capacitor
RD/Indicator lamp K1/Power switch
T1/Transformer K2/Speed switch
PCB/control plate OUT/socket