You have just purchased a “SOLO/SOLO3000” fingerprint identification reader built by the company EDEN INNOVATIONS. The entire EDEN INNOVATIONS team would like to thank you for your interest as well as your confidence in our security solution. We hope that you will be completely satisfied with the level of security it provides for your company’s premises.
Information and recommendations o Pursuant to European directive UTE C00-200, incorporating directives 89/336 EEC and 92/31 EEC, SOLO/SOLO3000 complies with the following standards: • NF EN 50081-1 governing electromagnetic radiation, and • NF EN 50082-1 governing electromagnetic susceptibility. o Cabling recommendations: the cables used to connect readers, the network and other peripherals must be installed in accordance with the instructions for Level 2 (protected environment) of standard NF EN 61000-4-4.
Technical manual SOLO/SOLO3000 – V1.5 p.5/12 Technical characteristics 1) SOLO/SOLO3000 Maximum power consumption ..300mA @12V Power supply voltage ...... 9 – 14VDC Weight ..........195 g Housing dimensions ......121 x 78 x 39 mm Operating temperature ....- 20°C to + 50°C ............
Technical manual SOLO/SOLO3000 – V1.5 p.6/12 Wiring diagram 1) Connecting reader on C1P2FX control unit POWER SUPPLY 12Vcc RS485 Data sheet : SYT recommended 1200m (2730 ft) Max Ø 0.6 mm (1/30 in) 2 pairs recommended Be sure to use the same pair for A and B...
Technical manual SOLO/SOLO3000 – V1.5 p.7/12 2) Connecting reader on C4PLUSFX control unit POWER SUPPLY 12Vcc RS485 (?) Data sheet : SYT recommended 1200m (2730 ft) Max Ø 0.6 mm (1/30 in) 2 pairs recommended Be sure to use the same pair for A and B...
Technical manual SOLO/SOLO3000 – V1.5 p.8/12 3) Connecting reader on GENIUS control unit Power Supply +12Vcc RS485 (?) Data sheet: SYT recommended 1200m (2730 ft) Max Ø 0.6 mm (1/30 in) 2 pairs recommended Be sure to use the same pair for A and B...
Technical manual SOLO/SOLO3000 – V1.5 p.10/12 Check list SOLO / SOLO 3000 Serial number ID number Gasket Torx bit Torx screw Bag Wall seal...
Need help?
Do you have a question about the SOLO and is the answer not in the manual?
Questions and answers