Screws With A Torx Head - Barco TF-20 Service Manual

5.4

Screws with a Torx head

Screws with a Torx head
These screws have double functionality:
• They position the shader on the frame
• They position the frame on the display
Removing these screws happens in two steps. First unscrew the first part (out of the display) then lift the screw until it takes thread
to unscrew the second part (out of the frame).
Image 5-3
W
ARNING
R59770270 TF-20 21/05/2008
:
Lifting the screw can be done with a finger nail or by using a small flat screwdriver.
5. Before you start
29