GTV 172485 Owner's Manual

2.0 amp oscillating tool 100 piece kit

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

2.0 AMP OSCILLATING TOOL 100 PIECE KIT

Rating:

Amperes:

Speed:

Weight:

Need Assistance?

Call us on our toll free customer support line:

1-866-349-8665 Monday – Friday from 9am to 5pm Eastern Standard

Time



Technical questions



Replacement parts



Parts missing from package

Warning:

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to the State of California to cause cancer and

birth defects or other reproductive harm. Some examples of these chemicals are:



lead from lead-based paints,



crystalline silica from bricks and cement and other masonry products, and



arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of

work. To reduce your exposure, work in a well-ventilated area and with approved safety

equipment, such as dust masks that are specially designed to filter out microscopic particles.

Warning:

This product contains chemicals known to the State of California to cause cancer

and birth defects or other reproductive harm.

Manufactured For and Distributed By

True Value

Company, Chicago, IL

Made in China

PRODUCT SPECIFICATIONS

120V AC, 60Hz

2.0 AMP

21,000 OPM (no load)

2 lb 11 oz (1.23 kg)

172485

Owner's Manual

Table of Contents

Need help?

Do you have a question about the 172485 and is the answer not in the manual?

Questions and answers

Summary of Contents for GTV 172485

Page 1: Product Specifications
2.0 AMP OSCILLATING TOOL 100 PIECE KIT 172485 Owner’s Manual PRODUCT SPECIFICATIONS Rating: 120V AC, 60Hz Amperes: 2.0 AMP Speed: 21,000 OPM (no load) Weight: 2 lb 11 oz (1.23 kg) Need Assistance? Call us on our toll free customer support line: 1-866-349-8665 Monday –...
Page 2: Table Of Contents
TABLE OF CONTENTS Product specifications ………….………………………………………………………………... Table of contents ……………………………………………………………………...………..General safety warnings ……………………………………………………………..………..3–4 Eye, ear, & lung protection …………………………………………………………………..Electrical safety ……………………………………………………………………….………..Power tool safety ……………………………………………………………………...………..5–6 General warning ………………………………………………………………………………..Work area safety ………………………………………………………….…………..………..Electrical safety ……………………………………………………………………….………..Personal safety ………………………………………………………………………..………..Power tools use and care ……………………………………………………………………..
Page 3: General Safety Warnings
GENERAL SAFETY WARNINGS READ AND UNDERSTAND ALL SAFETY AND OPERATIONAL INSTRUCTIONS. Failure to follow the safety rules listed below and other basic safety precautions may result in serious personal injury . KEEP THIS MANUAL, SALES RECEIPTS AND APPLICABLE WARRANTY FORMS FOR FUTURE REFERENCE.
Page 4: Eye, Ear, & Lung Protection
GENERAL SAFETY WARNINGS ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA REQUIREMENTS or ANSI SAFETY STANDARD Z87.1 FLYING DEBRIS can cause permanent eye damage. Prescription eyeglasses ARE NOT a replacement for proper eye protection. Non-compliant eyewear can cause serious injury if broken during the operation of a power tool.
Page 5: Power Tool Safety
POWER TOOL SAFETY If operating a power tool in a damp location WARNING: Read all safety warnings is unavoidable, use a residual current device and instructions. Failure to follow the warnings (RCD) protected supply. Use of a ground fault and instructions may result in electric shock, fire circuit interrupter (GFCI) reduces the risk of and/or serious injury.
Page 6: Power Tools Use And Care
POWER TOOL SAFETY Power tool use and care Service Do not force the power tool. Use the correct Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical power tool will do the job better and safer at the replacement parts.
Page 7: Specific Safety Rules
SPECIFIC SAFETY RULES WARNING: Always wear eye protection. Any power tool can This product contains throw foreign objects into your eyes and cause chemicals known to the State of California to permanent eye damage. ALWAYS wear safety cause cancer and birth defects or other goggles (not glasses) that comply with ANSI reproductive harm.
Page 8: Extension Cord Safety
EXTENSION CORD SAFETY WARNING: Keep the extension cord MINIMUM GAUGE (AWG) clear of the working area. Position the cord so EXTENSION CORDS (120V use only) it will not get caught on the workpiece, tools or Amperage any other obstructions while you are working rating Total length with the power tool.
Page 9: Symbols
SYMBOLS WARNING: Some of the following symbols may appear on the oscillating tool. Study these symbols and learn their meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this tool. Volts Direct current Amperes No load speed Hertz Alternating or direct...
Page 10: Know Your Oscillating Tool
KNOW YOUR OSCILLATING TOOL ON/OFF switch Hex key Hex key holder Air vents Accessory holder CONTENTS OSCILLATING TOOL COMPONENTS Carefully unpack the oscillating tool. Compare DESCRIPTION the contents against the “OSCILLATING TOOL Oscillating tool COMPONENTS” chart at right. 5 mm Hex key 1 1/4"...
Page 11: Contents
CONTENTS...
Page 12: Assembly And Operating
ASSEMBLY AND OPERATING Place the blade (5) on the accessory INSTALLING ACCESSORIES holder (Fig. 2). All accessories are installed on the oscillating NOTES: tool in a similar manner. For the purposes of Make sure the alignment holes (6) in the describing the accessory installation, the half blade fit over the alignment pins (7) in the circle blade is used.
Page 13: Installing Sandpaper
ASSEMBLY AND OPERATING ON/OFF SWITCH INSTALLING SANDPAPER To turn the tool ON, slide the ON/OFF Install the hook & loop sanding pad (1) switch (1) toward the front of the tool onto the tool (Fig. 3). (Fig. 5). Firmly press the sandpaper (2) onto the To turn the tool OFF, slide the ON/OFF hook &...
Page 14: Flush Cutting A Door Jamb And Casing For Installing Flooring
ASSEMBLY AND OPERATING Place the tool with the saw blade (3) lightly touching the surface of the tile and the WARNING cutting teeth NOT touching the surface to be cut. For safety reasons, the operator must read the sections of this Owner’s Manual entitled Turn the tool ON (Fig.
Page 15: Cutting A Hole In Drywall For Installing An Electrical Outlet Box
ASSEMBLY AND OPERATING CUTTING A HOLE IN WOOD FLOORING TO NOTE: The tool and blade should be at a 45° angle to the floor to allow the corner of the blade INSTALL A HEATING VENT (see Fig. 7) to plunge cut into the flooring. Install the plunge cutting saw blade for While holding the tool tightly, slowly plunge wood in the tool (Page 12).
Page 16: Using A Detail Sander Attachment
ASSEMBLY AND OPERATING CUTTING A HOLE IN DRYWALL FOR USING A DETAIL SANDER ATTACHMENT INSTALLING AN ELECTRICAL OUTLET BOX – cont’d Install a sanding pad on the oscillating tool (Page 12). Place the corner edge of the saw blade (2) near the drywall in the middle of one of the Install the sandpaper on the sanding pad cutting lines.
Page 17: Maintenance
MAINTENANCE GENERAL WARNING: When servicing, use only identical replacement parts. The use of any other part may create a hazard or cause product damage. DO NOT use solvents when cleaning plastic parts. Plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
Page 18: Exploded View
EXPLODED VIEW...
Page 19: Parts List
PARTS LIST WARNING: When servicing, use only original equipment replacement parts. The use of any other parts may create a safety hazard or cause damage to the oscillating tool. Any attempt to repair or replace electrical parts on this oscillating tool may create a safety hazard unless repairs are performed by a qualified technician.
Page 20: Warranty
30-Day Limited Warranty This product is warranted for 30 days against any defects in material and workmanship. If defective; the product will be replaced free of charge. Simply provide proof of purchase and return the tool to your place of purchase. Normal wear or damage due to abuse, mishandling, or unauthorized repair is not covered.