Sherwood Newcastle D-480 Operating Instructions Manual page 10

MUSIC SEARCH PROGRAMMING
The automatic music search function automatically skips other programs, finds and starts playback from the desired
program.
Up to 20th program before or after the present program can be searched quickly.
During playback, press the button the desired number of times.
Example : When listening to the second program before or after the present program.
The second program can be searched quickly and and played back.
Automatic music search function might not operate as expected if:
The length of the blank space between two musics is less than 4 seconds.
The noise level of the blank space is very high.
The overall recorded volume level of the music is very low.
RECORDING
Load a tape to be recorded into DECK A.
1
Be sure the erase-protection taps on the cassette
tapes are in place.
B C
HIGH NORM
AMS
CD SYN
REC
L
dB -00
R
EJECT
M
RELAY
MPX MIN SEC
REC
-20 -10 -6 -3 0 +3 +6
Select the reverse mode.
2
: Recording of a single side.
: Recording of both sides.
When selecting recording of both sides and
recording first on the reverse side, recording is made
only on that side.
10
P
REVERSE